Jump to content
SAU Community

Recommended Posts

Hey everyone,

Seeing whats out there for swaps or cash sale for my R33 skyline, registered with RWC.

Will look at all decent swaps!

Here are the mods.

ENGINE, TRANSMISSION ETC:

* RB25DET series 2 engine (166xxx kms)

* 5 SPEED MANUAL

* FMIC

* T04E turbo

* Z32 AFM

* s/s highmount manifold

* 45mm aluminium radiator with new blue silicon hoses.

* greddy style plenum

* 80mm throttle body

* splitfire coilpacks

* custom 3" exhaust with screamer (all heat wrapped)

* 38mm Tial external wastegate with 1 bar spring.

* custom made stainless steel intercooler piping, all tig welded.

* extreme heavy duty clutch

* locked diff

* heavy duty clamps all round.

* Genuine nissan gaskets

* always serviced every 5,000kms or less with quality nulon products.

* 740CC fuel injectors.

* Apexi power FC with hand controller.

* Greddy profec B II digital boost controller.

* Turbo timer.

* HICAS lock bar.

* X-Force highflow cat.

* x-force muffler.

* short shifter.

* Gates racing timing belt (2,000 kms old)

* GMB high flow water pump replaced at the same time.

* replaced fuel hoses and vacuum lines along with clamps.

SUSENSION, WHEELS BRAKES ETC:

* Brand new rota wheels 18" with awesome offset.

* Greddy coilovers

* QFM A1RM brake pads all round.

* Workshop one 7mm steering lock spacers

* solid rear subframe bushes

* KKR Rear camber arms

* GKtech wheel spacers on the front only.

* forged wheel nuts

INTERIOR, EXTERIOR:

* mint condition interior

* new leather boots

* drift button

* alpine type r rear speakers

* sony xplode front speakers

* pioneer head unit

* HID headlight conversion

* White LEDs all round (number plate, parkers etc)

* factory Kit?

* dark window tint

* carbon fibre boot lip

* Copy momo deep dish steering wheel

* tinted windows

Personalised plates do NOT come with car.

Minor things that new owner may like to fix:

* slight parts of surface rust on rear wheel arches, cheap fix just have never worried about repairing it.

I am interested in swaps - will look at other imports, VIP's, rotors.....etc

Im sure there is more on this car than what i have listed, basically all parts have been installed within the last 16 months. the car was Dyno tuned by Gavin Wood where it made a healthy and safe 310HP at the rears on 1 bar with loads of torque, will make more HP with a bigger rear housing.

SERVICING:

I service this car every 5,000kms or 4-6 months, in the last two years of ownership i have put 6,000kms on the car but serviced it 4-5 times as i like to keep it fresh and well looked after. fuel filter, vacuum lines, belts, timing belt, water pump, radiator, radiator hoses etc, everything has been replaced within the last 5,000 kms.

image3.jpeg

IMG_0362.jpg

IMG_0386.jpg

IMG_0384.jpg

IMG_0380.jpg

IMG_0382.jpg

IMG_0379.jpg

Link to comment
https://www.sau.com.au/forums/topic/413234-qld-1995-r33-skyline-gts-t/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You have the option to do this. Nobody but me ever did this (go slower, I mean) Everyone seems to fall victim to "This would be a great setup for you, but for me, I need a little more power..."
    • Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
    • It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
×
×
  • Create New...