Jump to content
SAU Community

Genuine 350Z 18X8 Track Wheelset With Semi Slick Tyres 6 Of

DsignR
 Share

Recommended Posts

DsignR Apprentice

DsignR

Posted
Posted (edited)

NISSAN 350Z 6 SPOKE 18 X 8 WHEELS

PCD 5 x 114.3

TOTAL OF 6 WHEELS,

never go to the track without spares!!!!

wheels have been professionally sprayed in 2Pack Dark Grey Pearl.

All tyres size is 235 40 18

Full set of Yokohama ADVAN AO48 (4 of)

2 tyres are Toyo Proxes R888 (2 of)

All wheels have been Properly cared for, only done 2 track days at wakefield so heaps of life left in them.

These wheels do not have a mark on them, suit new buyer

Centre caps included.

I am willing to help the buyer ship the item if they organise & pay for item & shipping.

Any question please call

$2500 ono

post-75437-0-46644800-1352504199_thumb.jpg

post-75437-0-22224600-1352504456_thumb.jpg

Edited by DsignR
  • 2 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • AdiR34
      R34 Gtt Wheel Offset Advice

      By AdiR34 · Posted

      Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...