Jump to content
SAU Community

Removing rear bar - need help

LaL

By LaL,
in General Automotive Discussion

 Share

Recommended Posts

Craved Grand Master

Craved

Posted
Posted

6 nuts to be undone from inside the boot ... 3 either side below the lights towards the outside of the car.. 12mm if i remember right... then you have to remove the "skyline" from between the lights (4 nuts from behind plastic panel near latch) then there will be 2-3 clips on a shelf the bar sits on......... then slide it out!!

oh and check out the number plate mount.. will have to remove plate and possibly the mount too... i removed mine but not sure if essential!!

hope this helps

myr332 Enthusiast

myr332

Posted
Posted
6 nuts to be undone from inside the boot ...  3 either side below the lights towards the outside of the car.. 12mm if i remember right... then you have to remove the "skyline" from between the lights (4 nuts from behind plastic panel near latch) then there will be 2-3 clips on a shelf the bar sits on......... then slide it out!!

oh and check out the number plate mount.. will have to remove plate and possibly the mount too... i removed mine but not sure if essential!!

hope this helps

cool... i'll use this when my bodykit finally arrives.

you mention the "skyline" between the lights. do you know where I can get a hold of the "skyline" that actually illuminates? i don't know if this is an extra thing or if it's part of the series 1 skylines?

be very interested in getting a hold of one of those...

LaL Rising Star

LaL

Posted
  • Author
Posted
cool... i'll use this when my bodykit finally arrives.

you mention the "skyline" between the lights.  do you know where I can get a hold of the "skyline" that actually illuminates?  i don't know if this is an extra thing or if it's part of the series 1 skylines?

be very interested in getting a hold of one of those...

i have the SKYLINE PART off this gtr i am wrecking. what you wanna pay for it? its silver

myr332 Enthusiast

myr332

Posted
Posted
i have the SKYLINE PART off this gtr i am wrecking. what you wanna pay for it? its silver

really? nice... so it is the "skyline" section that is of the see-through type indicator plastic material type thingo-ma-boby-ma-jig (beware; i'm getting highly technical here)...? i'm not interested unless it lights up, because i've seen a few of them and they do look very cool and very rice'y..

cost? no idea... what's the going rate?

Craved Grand Master

Craved

Posted
Posted

myr332, the ones that light up are from series 1 gtst's cause they are clear, just have to install led's behind it.. i put a neon back there but it's not big enough.. will be hooking up led's soon!

you also have to paint the panel around the letters if you only want the letters lighting up, or leave it if you want all of it (skyline has silver chrome paint on it standard)..

Craved Grand Master

Craved

Posted
Posted
i think they go for about $250 F-Off-Buckaroos at a wreckers.  thats just too much for rice in my oppinion...hehe.  its only 20bucks or so here per sack at the local groceries:D:D

LOL, but does it GLOW??? :headbang:

myr332 Enthusiast

myr332

Posted
Posted
myr332, the ones that light up are from series 1 gtst's cause they are clear, just have to install led's behind it.. i put a neon back there but it's not big enough.. will be hooking up led's soon!  

you also have to paint the panel around the letters if you only want the letters lighting up, or leave it if you want all of it (skyline has silver chrome paint on it standard)..

so all I have to do is go to a wreckers and buy the see-through variety skyline plate? do they have these packaged anywhere (including the required neon) that I can buy off the shelf, or will it be a bit of a DIY job?

thanks for your help! :)

Blitz Grand Master

Blitz

Posted
Posted
no hes not. heslooking for a Series 1 R33 GTSt centre skline panel. stop acting like MR KNOW IT ALL.

Learn to read you rude little twat

cool... i'll use this when my bodykit finally arrives.

you mention the "skyline" between the lights.  do you know where I can get a hold of the "skyline" that actually illuminates?  i don't know if this is an extra thing or if it's part of the series 1 skylines?

be very interested in getting a hold of one of those...

Blitz Grand Master

Blitz

Posted
Posted
offcourse i read what he said, i was offering him something and you don thave to interupt like on all of my other sales.

You are a moron that clearly has an issue comprehending plain english.

I was clarifying what myr332 appeared to be looking for to assist your thread and attempt to prevent confusion.

Enough crying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PLYNX
      Short shifter r34

      By PLYNX · Posted

      Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • robbo_rb180
      Short shifter r34

      By robbo_rb180 · Posted

      stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • GTSBoy
      R34 oil and timing belt change

      By GTSBoy · Posted

      Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...