Jump to content
SAU Community

Arc Intercooler Stencil For Repainting The Original Logo

kylieyeah
 Share

Recommended Posts

kylieyeah Community Regular

kylieyeah

Posted
Posted

Hi guys,

I was wondering if there existed a stencil for the ARC symbol for intercoolers.

I have a twin entry M079 ARC intercooler for a BNR34 but as you can see from the image below, the symbol has faded quite a bit. Although, it did start off as white colour.

I know I can print one out, but to get the exact height, width etc would almost be almost impossible.

cooler-1.jpg

Owgasm Grand Master

Owgasm

Posted
Posted

Wouldn't be too hard David.

Gave you got a sticker guy down there? They could measure it up and do their thing.

Measure the entire grill area and locate where the ARC stands. Then they print out a vinyl stencil cut out, spray away.

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted (edited)

I wouldn't mind getting hold of the template if you can get one done aswell. You can't even make out the ARC letters on my cooler.

Also, just out of interest - have you got your bov's plumed back with this set-up and what intake set-up are you running? (stock box/pods/arc box etc)

Edited by wedge_r34gtr
kylieyeah Community Regular

kylieyeah

Posted
  • Author
Posted

Someone do the stencil thing as Owgasm recommended please and I'll buy it haha.

I've emailed ARC brazing to see if they can provide a stencil, but I highly doubt the chances of that happening.

mad082 Grand Master

mad082

Posted
Posted

if you can still make out the writing (you can on yours, but this comment is also for others wanting the stencil as well), simply mask up along the edges of the writing (and then tape up some newspaper obviously) and then you can spray it. just do a few light coats to minimalise the spray getting in under the tape between the fins.

you could also make a stencil for future use if you wanted. simply mask it up, get a sheet of clear contact or sticker vinyl, stick it over the tape, get a craft knife and run it around the inside edge of the tape (making sure to leave little tabs to the inside of the A and the R so they always go back in the same spot every time). then pull it of and stick it back onto the backing, or some thin plastic. then simply cut out the stencil. or simply trace around on some tracing paper after masking up, and then you can trace it onto some contact to stick on next time you want to paint it.

kylieyeah Community Regular

kylieyeah

Posted
  • Author
Posted (edited)

Also need some hard pipes on that twin entry ;)

yeah, it's just not in the photo. The cooler and hard pipes are both on the car atm :)

if you can still make out the writing (you can on yours, but this comment is also for others wanting the stencil as well), simply mask up along the edges of the writing (and then tape up some newspaper obviously) and then you can spray it. just do a few light coats to minimalise the spray getting in under the tape between the fins.

I'll guess I'll try to do this first! Use masking tape, as making a stencil seems pretty hard. Although I guess the issue would be getting the curved edges to be exact. I guess I'll do a DIY if I try it and turns out something like this!

0714.jpg

Edited by kylieyeah
Miguelone Grand Master

Miguelone

Posted
Posted

making a stencil is pretty easy, get someone to load the vector up and print it to the correct size, , mark it up on some manila folder material etc, cut it out with a sharp blade, stick it over and spray it.

kylieyeah Community Regular

kylieyeah

Posted
  • Author
Posted

Okay guys! This method about making a stencil would be great!

If someone would like to make one, I will happily chip in with them and help get it made up. I just dont have any hook ups to a sticker/stencil maker or anything.

Would be great if someone could organise! I'm very keen on getting this ARC symbol looking new again and will do whatever is reasonable! :)

mad082 Grand Master

mad082

Posted
Posted

yeah, it's just not in the photo. The cooler and hard pipes are both on the car atm :)

I'll guess I'll try to do this first! Use masking tape, as making a stencil seems pretty hard. Although I guess the issue would be getting the curved edges to be exact. I guess I'll do a DIY if I try it and turns out something like this!

0714.jpg

if you use a thin tape to tape it up you should be able to get the curve right, as well as cutting it with a craft knife

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      First/Second Post

      By GTSBoy · Posted

      It's the adhesive holding the ceramic wheel to the shaft the fails on 90% of them.
    • joshuaho96
      First/Second Post

      By joshuaho96 · Posted

      Foreign debris, physical shock, boost leak, could be anything honestly. The danger in taking all the timing out of a tune/hitting the R&R corner is that even if the engine doesn't detonate your turbo is taking a lot of abuse from high EGT. Also, even if nothing goes wrong it is a journal bearing that is spinning at 100k RPM on boost. Eventually it goes through enough cold start/pressure cycles to wear it out.
    • Vee37
      Possible option to replace central computer 370 V36

      By Vee37 · Posted

      I kinda accidentally saw this, and was interested, but It actually seems to replaces the whole center computer, using the existing screen and buttons. AND it may only be for a G37 and not compatible with a Japanese 370. So its not for me, but someone else may be interested to look into it. Its about $680USD. If I am understanding it right, it basically replaces/installs and android pc that integrates with the existing screen. But I could be wrong. https://gromaudio.com/vline/ The video I first saw was the following, with very little and unclear details.     Even if your not interested in the system, the video on their site was pretty comforting in showing how simple the whole centre comes out
    • Ozdavroz
      R33 GTR tail light

      By Ozdavroz · Posted

      hfygrte52 what side you looking for? Do you care what color car it's off? Found a white LH side on here: https://skylinespares.com.au/product/nissan-skyline-r33-coupe-rear-tail-light/   Aussie parts place but will ship to USA. Maybe get it before there's a tarrif on 25yo shit box parts
    • CRSKmD
      Import insurance in 2025

      By CRSKmD · Posted

      I’m with Shannon’s for all 5 of our cars. Agreed values seem fair, premium price is okay. ($210 ish a month, all comprehensive).  Have claimed once with them for a not at fault claim with another car where my car had no damage. Was one call after the incident and an email after. Deemed not at fault so premium didn’t go up either.    I have called up and spoken with people who are not familiar with certain cars and didn’t agree with me on value or let their personal vehicle preferences effect the call. But called back later and got someone else who was more agreeable.  
×
×
  • Create New...