Jump to content
SAU Community

Recommended Posts

Why is it a waste of money? You could save me some cash here.

Stock blocks have been proven reliable well past 800whp, so unless your building a dyno queen or drag monster... why bother.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Thanks for all the suggestions. (

Coming away from this and talking to him, I think there is two ways forward for his needs

1. Buy one of the cars already built for $20K, sell his car with damaged engine to somoene who wants to customise a rebuild

2. Get the bolt ons and talk to a builder about what is possible with the rest of the build.

2860-5/7 turbo's $2500

Haltech inc boost controller $2000

Jun Fuel pump $400

IDC1000 Injectors $1000

Fuel rail to suit injectors $350

Fuel regulator + guage $100

Apexi air intake $700

DFI radiator $700

Intercooler $1000

Metal intercooler piping kit $400

Inovated air/fuel guage $200

Oil cooler + relocator with thermostat $1500

Engine in/out $2000

Total $12850 + $7K rebuild

Unsure on what exhust he has, so dumps etc would likely be needed.

Thanks for all the suggestions. (

Coming away from this and talking to him, I think there is two ways forward for his needs

1. Buy one of the cars already built for $20K, sell his car with damaged engine to somoene who wants to customise a rebuild

2. Get the bolt ons and talk to a builder about what is possible with the rest of the build.

2860-5/7 turbo's $2500

Haltech inc boost controller $2000

Jun Fuel pump $400

IDC1000 Injectors $1000

Fuel rail to suit injectors $350

Fuel regulator + guage $100

Apexi air intake $700

DFI radiator $700

Intercooler $1000

Metal intercooler piping kit $400

Inovated air/fuel guage $200

Oil cooler + relocator with thermostat $1500

Engine in/out $2000

Total $12850 + $7K rebuild

Unsure on what exhust he has, so dumps etc would likely be needed.

A few things

1 don't need the apexi intake, stock air box is fine

2 haltec ecu's are rubbish compared to what else is out there

3 you can get a twin entry rail to suit those injectors for less then $150,

4 you dont need big injectors for -7 turbos so no need to change rail

5. Fairly certain there's koyo radiators going for less then 600 (not that that set up needs a big radiator)

6 there's heaps more but I can't be bothered

Thanks for the reply Joe

Please identify the better ECU please and why it is better, most in Aust know the Haltech and can use it well. Vipec is good but not as supported. I'm not up-to-date on the latest advancements.

Are you basing the rest of your comments on a 300kw car? Air box and injectors are limiting at above 300kw I understand. If anything i'd expect the intercooler to be the first thing to be cut.

He'd prefer to get something that is a bit over kill then be on the limit, particularly things like injectors.

Airbox and injectors are not limiting to 300rwkw.

Airbox will do 400rwkw, it's been proven time over. $700 saved.

Stock piping is fine, doesn't look great, but stops compressor surge. $400 saved

Injectors will do around 300-320rwkw, which is what -7s will make max. So you save not needing rail/injectors/FPR etc. $1400 saved

Intercooler is also totally fine. $1000 saved

So $3500 saved already from things you simply do not need, and never will :)

Thanks for the reply Joe

Please identify the better ECU please and why it is better, most in Aust know the Haltech and can use it well. Vipec is good but not as supported. I'm not up-to-date on the latest advancements.

Are you basing the rest of your comments on a 300kw car? Air box and injectors are limiting at above 300kw I understand. If anything i'd expect the intercooler to be the first thing to be cut.

He'd prefer to get something that is a bit over kill then be on the limit, particularly things like injectors.

I've talked to my tuner about different ecu's, Haltechs are not as good as others for a number of reasons and are over rated. the better ecu's out there include Link G4, vipec, autronic.. After talking to him I'd still get an apexi pfc over a haltec

I'd suggest finding a tuner that does one of these, I'm using the link and am often complemented on how smooth the car is to drive, even with the extensive mods I have

My old set up was a 300rwkw set up and I didn't have half the stuff u have listed..

One thing I do suggest is upgrading your fuel pump to a new item nismo/stock what ever u want, and ensure it has plenty of volts to it..

A few things

1 don't need the apexi intake, stock air box is fine

2 haltec ecu's are rubbish compared to what else is out there

3 you can get a twin entry rail to suit those injectors for less then $150,

4 you dont need big injectors for -7 turbos so no need to change rail

5. Fairly certain there's koyo radiators going for less then 600 (not that that set up needs a big radiator)

6 there's heaps more but I can't be bothered

This!

Airbox and injectors are not limiting to 300rwkw.

Airbox will do 400rwkw, it's been proven time over. $700 saved.

Stock piping is fine, doesn't look great, but stops compressor surge. $400 saved

Injectors will do around 300-320rwkw, which is what -7s will make max. So you save not needing rail/injectors/FPR etc. $1400 saved

Intercooler is also totally fine. $1000 saved

So $3500 saved already from things you simply do not need, and never will :)

This!

I'd run with a Nistune or an APex'i PFC.

I've talked to my tuner about different ecu's, Haltechs are not as good as others for a number of reasons and are over rated. the better ecu's out there include Link G4, vipec, autronic.. After talking to him I'd still get an apexi pfc over a haltec

I'd suggest finding a tuner that does one of these, I'm using the link and am often complemented on how smooth the car is to drive, even with the extensive mods I have

So... you haven't actually used a Haltech? what reason's did you tuner give?

I've used a vipec/link and Haltech in my car. IMO Haltech is an awesome ECU, as good, if not better then a Vipec. Would not hesitate to buy another Haltech.

Edited by wedge_r34gtr

Haven't used a haltech, have been right there standing next to the dyno when cars with haltechs have been tuned.. There's a reason my tuner charges extra to do a haltech and that's cause they are a pain in the ass, he has a standard to which a car needs to be before he lets a car leave.. And haltechs take a lot longer to reach that standard.. And he knows his stuff I assure u

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...