Jump to content
SAU Community

The Yellow Lunchbox


joorsh
 Share

Recommended Posts

So here's my ugly yellow thing:

Stagea-edit.jpg

And that's how she rolled off the boat from japan, resplendent with stone chips, grandpa-grill and stupid sleepy eyelid thingies.

Now the interior. Where to begin.

There was no less than 3 different sized TV screens, 2 independant CD stacks, 3 head units (yes, three), 2 amps, 2 subs, 2 different alarm systems and more dodgy wiring than a Telstra telephone exchange. Just about everyhting had a remote too, and they had all been attached to the key ring. The entire key ring with all the alarms and remotes was so big that it couldn't fit inside the elbow-box on the centre console. The import guy couldn't stop pissing himself laughing as he handed the keys over. My favourite part was probably this though:

IMG_0236-edit.jpg

This photo was taken halfway through my exorcism of the wiring-demons. Note the innocent-looking little box near the top of the tangle? This ingenius device was labeled "MAXIMUM PARTY LIGHTS". When activated, it flashed the headlights, brake lights, indicators, high beams, reverse lights - EVERYTHING - all in time to whatever music you had playing. Sometimes there are just no words.

There were also 2 little black boxes jammed under the centre console. Their sole purpose was to play ridiculous little tunes. One box played an irritating song if you left the door open with the headlights on. The other box played a completely different (but equally irritating) song if you left the keys in the ignition. Here's the thing though: they didn't disable the factory Nissan "bing bing bing" sound. If you left the keys in the ignition with the door open AND the headlights on, what resulted was the most god-awful cacophony I've ever heard. Surely one stupid music box was enough? What the hell made them think they needed 2?!

I removed everything that wasn't factory, put it in a BIG carboard box and put it on my bathroom scales.

29 kilo all told.

46 kilo if you included the subs.

That's equivelant to like, a small girlfriend.

I threw it all on ebay and was able to offset the rego cost of the car, so pretty happy about that.

Aside from the atrocities committed against the electrical system, the car was otherwise unmolested. There was a HID kit that looked professionally installed and a cat-back exhaust. Considering some of the lemons I've imported in the past, I think I managed to score a reasonable Dayz edition Series 2.

Edited by joorsh
Link to comment
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Next I had a choice to make:

  1. Spend every dollar I have on MOAH POWAH, grenade the motor, and then whine loudly on the forums about the "weak RB motor" and how unlucky I am. Or...
  2. Cover some basic maintenance items first, and spend whatever is left on go-fast bits.

I may be the odd one out here, but I opted for number 2. I dumped every fluid the old barge had, and to my pleasant surprise they all looked pretty clean. I also replaced some of the worst

hoses in the engine bay and threw a new set of sparks in for good measure. Fuel, oil and air filters also got covered, and topped it off with a fresh set of brake pads.

Edited by joorsh
Link to comment
Share on other sites

My wallet was a little on the light-side now, so I sold the cat-back exhaust and set about making my own dodgy contraption to replace it. After a few tests I decided to double-muffle the old girl, and adapted an old GTST dump pipe I had sitting around. The end result actually looks pretty passable and has a nice soft rumble to it. I even had some old heat-wrap that I wound on for good measure. I'll be under the car tomorrow so I'll post some pics up then.

I used the proceeds from the old cat-back to splurge on 400 bucks worth of intercooler (Play-Doh sold separately):

_MG_7165-edit.jpg

Considering the cost I was pleasantly surprised. Propper T-clamps, fibre-cored silicon hose and all-alloy piping. The welds on the end-tanks look quite respectable (definitely better than what I usually produce), and the black coating is uniform and smooth. Major props to JustJap on the shipping time too - it arrived at my door 22 hours after I placed the order online.

Weather permitting this'll be going on tomorrow along with a new fuel pump. I'll post some happy snaps at the end of the day.

Edited by joorsh
Link to comment
Share on other sites

Ahh, familiar with MRC are we?

I only met Mark a few weeks ago but I have known Ben for >11yrs. Mark reflashed the Nistune with the correct base image for me after a year or so of niggling issues seemingly created by the auto image. I use Andrew@ASR Automotive for mechanical work and he is directly on the opposite side of Carrington Rd.

Link to comment
Share on other sites

It was all connected and fully working (even the satnav) - in all of its insane glory. Mind you I couldn't operate any of it because it was all in Japanese, but I could make kinds of strange stuff some up on the screens just by button-mashing.

There were 5 or 6 different devices stuck on top of the dash (including one of the screens), and another 7 or 8 devices scattered throughout trhe car. It took me the better part of 2 days to strip it all back - I had to take the seats and carpet out - the works.

I actually kept the best one of the three screens and set it up so my little girl can watch the wiggles in the back :)

Link to comment
Share on other sites

I did actually manage to fit both the intercooler and the fuel pump over the weekend, though the intercooler took much longer than anticipated. I was fully expecting the "bolt-on" kit to be not-so-bolt-on, but I had to get creative when I saw how low it sat down. There seem to be quite a lot of posts on these forums about how low some of the JustJap intercoolers sit, so I did some creative part-relocating and was able to get it tucked up nice and high:

_MG_7179-edit.jpg

I had to relocate the horns & external temp sensors, and i also shaved a few mm off the thermo mounts to get it in closer to the aircon core.

I also trimmed the supplied intercooler brackets to pull the cooler in closer, and then I actually ended up flipping the brackets upside-down to give me another 4 or so inches of height. All in all, it sits up there nice and high, well away from driveways, speed bumps and small flightless birds.

All of the mounts and pipes fot very well considering the price i paid for everything, and all in all the cooler height was still above the legal minimum, it was just a personal preference thing for me to sit it up that high.

Pictures of my dodgy mounts and relocating to come.

Edited by joorsh
Link to comment
Share on other sites

Very nice. Welcome to the club.

Yellow C34s, according to my mates wife, look like a taxi f**ked a hearse. At least that's what she says about mine :) I struggle to disagree.

Get rid of those eyelids, stat!

Is she a manuel or slusher?

Link to comment
Share on other sites

Thanks for the welcome :)

Re: The dopey eyelids. I actually went as far as to start lifting them, but there's all this sticky tar crap underneath which made it look like it had hairy eyebrows. This is the lesser of two evils until I can find some tar-remover that doesn't make the headlights go cloudy.

She's a manual. I spent longer looking for this one than any of my other imports (a little over 3 months just to find it, then double that before I was driving it). Auction grade 4.0 low KM manual Stageas are BLOODY hard to find! I think the biggest selling point for me was the log books. While that doesn't guarentee the KMS are genuine, it goes a long way to help.

Here's some pics of the adjustments. Unfortunately most of the pictures are post-install. I got about an hour into it and went to grab the camera, saw the state of my hands and decided I didn't want to cover my camera in grime, oil, blood & metal filings.

No holes were drilled for any of these - Mr Nissan was nice enough to pre-drill dozens of them for me to use. Top-down view of the temp-sensor, relocated to drivers-side chassis rail:

_MG_7187-edit.jpg

Thermo fan clearance to intercooler is about 3mm. Both solid mounted so no movement, and 3mm is plenty to cover expansion/contraction under heat:

_MG_7188-edit.jpg

Horns relocated. Angled back about 20 degrees and moved up closer to bonnet release (re-used original brackets).

_MG_7189-edit.jpg

Intercooler mounts, top-down view from the bonnet latch. You can see the mounts are flipped 180 to give it some extra height. One of the brackets shares a mounting point with the thermo fan, so I had to get creative there. The thermo is flush against the car body, then there's a 20mm spacer, and then the L-bracker is attached pointing upwards. Had to do it that way or the bracket didn't clear the thermo fan mounts.

_MG_7190-edit.jpg

_MG_7192-edit.jpg

Mandatory left-over bits. Small child & kelpie sold separately:

_MG_7184-edit.jpg

P.S Love the taxi/hearse analogy. I'm using that from now on.

Edited by joorsh
Link to comment
Share on other sites

Nice buy!

I was at the SAU Nats on the weekend, and there was three other Stageas there yesterday for the SnS: Alex (PN-Mad) in his NM35; Gavin (533 RYC) in his s2 (which is also a yellow RS4S); and a guy from Canberra in his white s2 (didn't get a chance to properly meet him and catch his name, sorry).

Us three Sydney guys are all fairly local - Gavin lives on the border of Blacktown and Hills Districts, Alex in Pennant Hills district, and I'm on the border of Parramatta and Blacktown.

Link to comment
Share on other sites

It seems that nissan made a lot of RS4S's in manual then

Looks good, needs more dayz carbon filler piece on the front bumper ;)

I take it you mean Yellow, I know you know RS4S = Manual.

This is only the 2nd Yellow S2 RS4S Dayz with twin sunroofs that i have seen.

Nice car joorsh, very clean. Shame you didn't take a video of the disco party before taking it all apart. Or did you ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • It's worth looking at Neil's garage thread, he was super organised (as you'd expect). He had a simple bunnings narrow shelving rack with tubs, each tub numbered, each number had a manifest. Of course, only about half the parts had made it to that system, and he had random stuff from old projects like kawasaki triples and even a Bultaco (a wtf? I said). I really don't want to throw stuff like that because it is irreplaceable, but it's also hard to know who could use it without spending a heap of time I don't have on research. Not co-incidentally, I've recently decided to try and move on some parts too, either random non-skyline stuff like S13 axles or anything R32 that I had more than 2 spares of (yes, I have a lot of space and a lot of spares). Most of the stuff is on commercial racking which is too deep for practical use for loose spares. Where possible stuff is in plastic tubs (various sizes) to keep critters from eating them. The whole place is a disaster for the poor person who has to clean it out when I'm gone. For the R32 spares, I aim to have one ready to go spare (eg rebuilt gearbox, engine, driveshafts, hubs, control arms etc) and one ready to prep spare.  Even so I've ended up with lots of 3rd or more spares and I'd rather see someone else keep their car on the road. Also I've ended up with some interior stuff like boot trims and floor mats I'll never need. So, I'm about to re-enter the painful world of online selling. I'm not on facebook (and won't be) so that is not an option, I'll start a thread on here for R32 stuff and people who need something can find it. I don't really need to throw anything for space reasons, but I somehow doubt the Greddy Rebec III will be in high demand. Oh, and I've got heaps of bench space and heaps of racking.....but still the bench is covered in half done or about to start jobs, I really need to get it better under control but time is an issue
    • This is the current antenna, 4g bands are the ones I'm after, particularly the Telstra long range one which I think is 850Mhz? It has an SMA connector to a 3 way splitter, one runs to the Cel Fi and 2 to a USB 4g wifi stick The problem is not the antenna, the problem is that the V37 has a slightly smaller gap between the rear windshield and the body which prevents the line from being tucked away under it as it was in the Fuga. Therefore, I have about a meter of cable that I can't adequately secure running down the outside of the car to enter the boot....I figure I need to use a roof mount antenna instead and run the cable inside the car The other option I'll look at is removing the factory shark fin (which I assume is factory GPS, which is crap, I use TomTom app on my phone) and I'll bet there is already a hole in the roof under that I could use. Any alternative approach is very much welcome!
    • Hi everyone    any help? Revving upto 3k   Checked tps  0.48  &  Throttle working alright.   adjusted throttle bolt also   tried unplugging tps but still same   Nothing changed still revving same IMG_1261.mov
    • Thanks Komdotkom, I would take you up on that offer, but the cost of shipping to NZ would be horrible. 
    • So what I hear from Rob and Mark is, Matt needs to stay the hell away from your places when you choose to do cleanups, for fear my hoarding will get worse, as Ill likely find things to suit some of the projects I want to build... As for ditching stuff like Mark does, I wish I could do it so easily mate, but lots of my spares are for the R33 and I'm slightly attached to them...   However, I was staring at the pile of subs, 2 for the car, 2 for a home audio system and thinking I'll likely just ditch those... That's. A lot of space back...   I must hurry up and finish the Subaru, and then the skyline... That's probably get some space back...   But my main take away is, other than big plastic tubs, and some sort of categorising what you have in each, no one has found a good solution, that takes up the minimal amount of space possible?   And Rob, I've been wanting a mezzanine, and have been tempted to put one in, but I'm borderline not enough height, and secondly, I hate heights! (No good spot for stairs, so it'd either be fold up stairs, or a ladder, of which I hate ladders and can't carry the bigger stuff up).
×
×
  • Create New...