Jump to content
SAU Community

Recommended Posts

Hey guys

Just wondering if anyone has canberra specific (Kambah) information related to the blends of these fuels. I believe the winter blend is around e70 for cold start and the summer blend can be up to e85, but I would like some information from someone who has been running the fuel if there is anyone?

Any information would be much appreciated.

Thanks

A mate of mine just recently had his car tuned in sydney for E-85 and was told by the tuner that the two locations in canberra (nicholls and kambah) is not E-85, it is more a blend of 65% ethanol and the rest unleaded.

From what he was saying there is a major power differance between getting proper E-85 from a supplier like Trojan etc can be up to 30% being that E-85 being higher in power output compared to the "flex fuel" (@ nicholls and kambah)

I know you can get 44 gallon drums for a reasonable "ish" price from sydney and fill when you need to.

But in saying that you will then become your very own servo.

Edited by ScR33m3r

A mate of mine just recently had his car tuned in sydney for E-85 and was told by the tuner that the two locations in canberra (nicholls and kambah) is not E-85, it is more a blend of 65% ethanol and the rest unleaded.

From what he was saying there is a major power differance between getting proper E-85 from a supplier like Trojan etc can be up to 30% being that E-85 being higher in power output compared to the "flex fuel" (@ nicholls and kambah)

I know you can get 44 gallon drums for a reasonable "ish" price from sydney and fill when you need to.

But in saying that you will then become your very own servo.

I heard this year starting december Caltex are going to actually bring in summer blend of 80-85% ethanol and that the winter blend is consistant at around 70% ethanol.

Apparently the difference in power between e70 and e85 is minimal like 15rwkw max when ranging in the 300's. Also the 85% ethanol will use more fuels than the 70% with minimal gains.

there is so much det supression even at e70 levels that you are unlikely to see any power gains in going to E85, 15kw comparing between dynos can just be the differences in the dynos or weather.

the main difference is that it throws your tune out, get it tuned on E85 and it run a bit rich on E70

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
×
×
  • Create New...