Jump to content
SAU Community

Recommended Posts

Hey guys time to get rid of some bits

2x Nismo LMGT4's 18x9.5 + 18 ( Matt black with bit of gutter rash and crap tyres) $1050

2 x Work XT7's 4 Stud 17x9 + 18 powdercoated black with Toyo R1R tyres 95% tread 235/40/17 $1100

2x Std R32 RB26 turbo's (came off a working car I was told) $100 the pair

2x R34 GT-R STD Stainless Steel dump pipes $200 the pair

1x R33 GT-R Intake Plenum freshly stripped and powdercoated satin black $220.00

Set of GT-R Throttle Bodies $100

Pair of brand new RDA 324mm rotors ( with some surface rust but never used) $200 with a free set of endless brake pads used but lots of meat.

Set of dog bone adapters to use r32/33 caliper on 324mm GTR rotor (80% sure these are for a GTS-T $80.00

BeeR rev limiter $80.00 used

R32 GT-R engine loom in good condition $160.00

Twin turbo pipe in std silver wit elbow for rear turbo in good condition $80.00

HKS VPC ( vain pressure controller) so you can run a map sensor on STD or remapped ECU including harness and remapped ecu $200.00

I am sure there is more but this is a good start

Email me collins.andrew.acATgmail.com

or sms 0434425026

Cheers

Located near baswater vic and can post at buyers expense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
×
×
  • Create New...