Jump to content
SAU Community

Recommended Posts

hey guys sent my car to mercury the other day to get a new fuel pump and nistune fitted and dyno tuned and only maid 156rwkw wanting at least 200rwkw any ideas?

car is pretty much stock except for

rb20det

rb25hiflowd turbo 12psi

255lph walbro f pump

fmic

3inch exhaust

pod

nistune ecu

stock injectors

stock afm

have a new 2 core ally rad and fuel pressure reg sitting at home to be fitted.

Link to comment
https://www.sau.com.au/forums/topic/414349-making-200rwkw-on-my-r32-rb20det/
Share on other sites

injectors will be a good start, also ..nistune on a stock afm??? where is the Z32

also i have gtr coilpacks cheap to go with the injectors you need

Edited by GH05T

Z32? i think he's a bit off that.. hope you enjoyed the service... i prefer to actually talk to the person working on my car.. what did they have to say about the result?

Edited by SliverS2

Z32? i think he's a bit off that.. hope you enjoyed the service... i prefer to actually talk to the person working on my car.. what did they have to say about the result?

didnt really say anything to me was a bit unhappy with it takeing over a week to get my car back but other then that i think they did ok. definatly will be fitting a z32 now thanks for the comments. any body know some not so pricey injectors to fit or for sale?

didnt really say anything to me was a bit unhappy with it takeing over a week to get my car back but other then that i think they did ok. definatly will be fitting a z32 now thanks for the comments. any body know some not so pricey injectors to fit or for sale?

so you live around brissy?

Id be seriously thinking larger injectors and getting on the Eflex, it should help you alot in getting to 200kw with 18psi wound up..

I highly recommend you see Gavin Woods, cant speak highly enough of his work, your just as important as the guy with the 35GTR there.

You need to wind up the boost, my old hr31 made about 150rwkw on 14psi with a vg30 and exhaust but stock everything else. My 32 made 230+ but was running about 20psi.

I think the limit of stock injectors/afm is about 180rwkw on a rb20, so I would upgrade them first and get a re-tune, I think you will have to run atleast 18psi or so to get 200rwkw.

Edited by eightsixboy
  • 2 weeks later...

so ive bought a z32 afm and denso 550cc will fit and tune in the next week or 2 and post a dyno. anything positive to say about denso injectors?

Have to change the plug, and when you want more power later you will wish you had of gone with GTR injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We've updated lots of Nismo items and accessories recently! Nismo in Japan don't keep a lot of stock on hand and they sell out frequently, but they do restock frequently as well. So if you put items in your shopping cart and make payment there might be a slight delay (2 - 4 days), or on rare occasions it might take longer. At any rate if you see something that is not available, wait a few days and then try again as it will likely be back in stock. We are considering just making everything available on the website and updating each order as needed if users aren't to concerned about putting an order in for something that could be delayed. https://www.oemsoko.co.jp/collections/nismo Nismo BNR34 GT-R and R34 (2 door, manual trans) floor mats:  https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r34-bnr34 Nismo BNR33 GT-R and R33 (2 door, manual trans) and Stagea 260RS floor mats:  https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34 Nismo BNR32 GT-R and R32 (2 door, manual trans) floor mats:  https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r32-bnr32
    • AA100 and AA110 are supposedly not cross listed, not sure what the differences are. Most likely you're better off rebuilding what you have unless the housing is trashed by debris circulating in the system or significant amounts of cavitation.
    • Try; skylinespares.com.au there was a couple of sets of Autech last I looked 
    • Not my proudest moment, but about 6 years ago, i did an oil change on my ex-gf's car while drunk. It was a Toyota Rav4 so they had a weird oil filter holder device that's not the standard oil filter. I went to start up the car and drove it from the driveway to the parking spot and i turned around to see the biggest oil spill i ever seen. It didn't end up being a problem because i filled the oil back up and tightened the filter properly, but after that experience i never worked on my cars drunk. 
×
×
  • Create New...