Jump to content
SAU Community

Recommended Posts

so after about 3 months i have my cefiro running again, so current specs are custom grind cams,gt35r turbo running 7psi and a 4 inch to 3 inch reducer until i get the money to get the ems fitted and tuned,forward facing plenumwith 4 inch throttle body, 3 inch turbo back exhaust, 38psi fuel pressure with a walbro 255 intank pump.

current issue is under load it will chug and not want to rev, have set the tps up with .5 v closed 4.1 v full open,free reving it will rev fine all the way to the liminter but sometimes it has a flat spot but can rev through it.

im wondering if

a)afm is to close to inlet of turbo, is about a foot away atm but was further away and still did the same issue.

b) injectors are full of shit from sitting in open air for so long.

c) i do have a air leak at the manafold to head but carnt see this causing it to run the way it does.

d) coil pack issue, has new plugs gapped down to .8mm, going to pull the coils out 2moz and give them a good coat of liquid rubber.

just need the car to drive to work and back for a week or 2 while the other car is getting fixed.

cheers tim

Link to comment
https://www.sau.com.au/forums/topic/414351-rb25det-s1-missing-and-coughing/
Share on other sites

ok well today i replaced the fuel filter threw some injecter cleaner in the tank, cleaned the maf out.

now got it running a bit better, can actually drive it to work thankgod. have a mate with a smoke machine ile throw that in the intake 2moz and see if theres any boost leaks. coils im going to pull them out and coat them in some liquid tape to make sure there not arching out in saying that i carnt see and sparks at night from them so may aswell clean the contact of the coils as well.

at the moment its running like crap on light throttle backfires while crusing, but once its got 7 psi in it it pulls f**king hard.

at idle you can see the black smoke puffing out the exhaust is currently running 2 bar fuel pressure at idle

ok so update, pulled the coils out and cleaned the contact points and covered them iin liquid tape,also regaped plugs down to 0.60mm, reset the timeing to 15 below, runs alot better now, can actually drive it to work, reset the tps and took it for a drive, blowing massive amount of black smoke while crusing and idleing, running 2.4 bar fuel pressure, any ideas why its so rich at idle?

also when its cold it backfires at idle, fairly loud aswell,dosnt take long to fill the house up with smoke, housemate dosnt like that at 8am lol

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
    • Got just the wing painted and fitted up to the existing boot. Big visual change and about time after having a GTR wing sitting in the shed since 2018 Headed up to Mallala with a quick obligatory stop in at Boliver OTR Oil control mods seems to have worked. I checked the catch can after session 1 and there was a dribble of water/e85 with barely any oil in it. After session 2 and 3 there was almost nothing and I stopped checking after that. so either great success or catastrophic failure/block of the external breather The GTR wing made a noticeable difference in the 160-185km/h sweepers. It was a very hot day for the cars at over 33C but the previously done cooling upgrade/ducting/water sprayers meant I never saw over 60C intake, 105C water and 100C oil and temps would drop back down very quickly once I shut it down. AD09's are a decent tyre but certainly and expectedly a step down when compared the the CR-S/AR-1 I have had on the car for years of track days. The handling characteristics of my car which I often describe using the Tony Hawks Pro Skater balance mechanic where either side of the center is understeer/oversteer was much more pronounced with no "green/safe" zone in the middle. However, imo it steers well/easily during oversteer largely thanks to the custom ACOSTAL front end. Enjoy a loose lap POV with my mate giggling away as a passenger.   Group photo for Peer Pressure Racing made it back home and gave it a wash Overall a great success compared to my previous two track days where i cooked the Starlets motor and blew up the new diff in the R32  
    • Nice. I'm looking forward to the updates!
    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
×
×
  • Create New...