Jump to content
SAU Community

Random Leds For Sale - Check With Me What You're Considering And I'll See What Stock Is Available - Also Zpe Up For Sale!


Recommended Posts

I'm winding down the last of my stock that is left over, most of it is at a reduced price to clear it from storage.

Basically no dash kits in T10's or T5's in stock that are BLUE, we still have White, Red, Green and Purple...limited pink.

Anything that you feel like checking stock levels and availability let me know and I'll secure the set for you.

Lots of R34 A/C illuminate kits left in RED, BLUE and WHITE

Lots of R33 A/C illuminate kits left in RED, BLUE, GREEN and WHITE..some fiddling I can make purple

Limited R33 GTSt, GTR kits available in the Purple, Red, White, Green

A couple of Map and Dome light kits, nice and bright compared to factory

Lots of 180SX kits left in RED, BLUE, GREEN, White and Purple

Parkers bulbs in a few different styles, Single SMD, RED, WHITE and BLUE, UV and Pink, Bright White, Brighter White & Hyper Bright White(can be used in selected models for number plates)

Tons of neo signal bulbs for random switches in buttons, A/C units and other compact areas....especially WRX HVAC units.

A lot of these bulbs are able to be fitted across a lot of ranges, so feel free to ask about your car and I'll see if we can magic something up.

I've also got tons of discrete strip lighting for hidden installation, weather proof and available as single SMD or triple SMD, Good for backlighting door handle and a general replacements for neon..

I'm sure I can add more to the list, but don't hesitate to contact me with any suggestions.

Also on the cards is the actual purchase of the Business and 'good will' that that has been accumulated over the past 5 years, You will get 3 month handover support from myself, full access to my factory and electrical engineers, not to mention second to none service and excellent delivery turnaround times. Includes my eBay shop name fully transferred to the new owner - $10,000 firm for this business, which will pay for itself in under 6 months for a complete eBay amateur, much less for the more business savvy. Good profits can be made even from a basic understanding of online businesses, and from the invaluable tips and idiosyncrasies of particular products that can make or break a customer's installation experience, But we have that mostly covered with very detailed install guides. Further details of other aspects, money saving techniques and unfounded complaint resolution will be gladly passed onto the new owner. My SAU advertising has been extremely limited, reinstating this would see some very good profits, enough to pay for the business in 2 months! As part of the deal with my manufaturer, all logo'd packing is included free of charge - It gives a more professional look.

thanks,

Dan

How much for white ac kit and purple and red dash kit for R34?

May I ask why you are looking to get out of the business?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
    • But I think you missed mine.. there is also nothing about the 98 spec that supports your claim..  according to the fuel standards, it can be identical to 95, just very slightly higher octane number. But the ulp vs pulp fuel regulations go show 95 (or 98), is not just 91 with some additives. any claim of ‘refined by the better refineries’ or ‘higher quality fuel’ is just hearsay.  I have never seen anything to back up such claims other than ‘my mate used to work for a fuel station’, or ‘drove a fuel delivery truck’, or ‘my mechanic says’.. the actual energy densities do slightly vary between the 3 grades of fuel, but the difference is very minor. That said, I am very happy to be proven wrong if anyone has some hard evidence..
×
×
  • Create New...