Jump to content
SAU Community

Recommended Posts

i went down the dark side and just bought a set of Blitz ZZR COilovers for my GTT from Just Jap , which are 100 more than the BC range

The ZZR also comes with extenders for the damper settings which is extremely useful for the rear cause that means u dont have to remove the back seats just to adjust them (tho u have to poke a hole thru the parcel shelf) and i can honestly say , the handlings much improved , feels stickier to the ground with alot less roll and suprisingly comfortable , but firm

only seen one bad review from a mitsubishi colt ,

but i still decided to go down the dark side path

+1 for me

Tried to find a cheap set of TEIN SS coilovers but i knew i wasn't really gonna find anything as cheap as i wanted so ended up buying a set of BC BR's. I'll let you know how they feel on my R34 GT.

By the way, any advice on spring ratings? Don't plan on tracking my car anytime soon, just some mildly aggressive street driving here and there. I've been recommended 8/6 Front/Rear. Sound right?

8/6 is pretty stiff. For street only I'd tend to slightly softer springs and slightly more sway bar. But there are plenty of people running around with 8/6 on the street and it's probably because of the fluoride in the water that their fillings aren't falling out.

8/6 is pretty stiff there are plenty of people running around with 8/6 on the street and it's probably because of the fluoride in the water that their fillings aren't falling out.

:-)

I went from stock to 8/6 BC's and they are rock hard, adjusting them from hard to full soft is like diamond vs granite, mines a track car, if it was street only they'd be straight out.

So what spring ratings do you guys recommend...

As i said, i don't track my car but i do like to take some corners on the road a little harder than necessary haha. I also don't want to sacrifice too much ride quality for ride height.

8/6 too hard? what is wrong with you guys? The standard 8/6 on the BC's is fine it's a bit harsh but nothing too bad I have them with uprated swaybars and daily my car as well as drifting. If anything I'd prefer a bit stiffer say 10/8 or even thicker swaybars but I am happy with current setup. From memory I have 24mm and 22mm swaybars

I have Kings Springs low, so whatever rating those are....it has to be less than 6 at the front, because they are much softer than 8kg/mm coilovers I've driven on. And I would say that that is juuuust right on the street. There is nothing worse than a car that rides like a crate of broken bottles on typical rough city streets. There is also nothing worse than driving a car that has massively stiff suspension in the wet.

But then, my car is also at a legal height, unlike most Skylines, and so I can afford to allow the wheels to move up and down relative to the body.

  • 3 weeks later...

for GTT owners, Blitz ZZ R coils or BC BR coils? Price diff is negligible, I just want the right pair.

Street driving ONLY, will not track. Will not be looking to go slammed either, just flush or 'slightly lowered'.

for GTT owners, Blitz ZZ R coils or BC BR coils? Price diff is negligible, I just want the right pair.

Street driving ONLY, will not track. Will not be looking to go slammed either, just flush or 'slightly lowered'.

The Blitz coilovers are a nice bit of kit, go in well, adjust nice and drive excellent for the dollars spent.

:thumbsup:

I went for the Blitz coilovers. 8/6 out of the box. Nice firm ride. I drive my car daily, so comfort was a big sale point for me, and they are quite good. I didn't adjust the dampering out of the box, but I think if anything, I could probs go a "tad" softer, but they are great.

Hsd are good, they have inverted shocks which is apparently better then the bc/tein way of doing things.

Really for under $1800 you only have 3 options, HSD, BC or the Blitz ones. I would stay clear of second hand units unless you know the history of them ie; an sau member, all the ones on egay I see advertsied are almost as much as new bc's, why bother.

So just got my BC BR's put in a few days ago. Although i've only had them for a short period of time so far, I'm really glad i chose them. They're much stiffer than my stock shocks but not too stiff if you know what i mean. They have significantly reduced the body roll that my car generates but are still kind enough on the car (and my back haha) to produce are firm but comfortable ride.

+1 for BC BR's

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ...just a note of warning, you shouldn't drive it about with the TCU in limp mode with only 3rd gear available ~ apart from the fact you end up sheering the ATF at the torque converter interface, the high clutch in these isn't especially the strongest, particularly bolted to the RB25DE mill...which is likely a 4AX01 box with lighter duty high clutch (the RB25DET got the bigger high clutch)...be careful out there...
    • Hoping to do similar mods to my RB20 once I get it running and reliable again
    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
×
×
  • Create New...