Jump to content
SAU Community

Red Light Camera Fine, Vehicle Was Entered The Intersection On Amber.


Recommended Posts

Hi guys, I just need to clarify my knowledge. As far as I know, provided the lights have NOT turned red (Green or Amber), and your front tyres have passed the line already, you cannot be fined. Am I correct?

I was driving home and there was a security truck in front of me turning left (as was I). When he entered the intersection there was still a green arrow, I'm practically right up his ass waiting for him to turn, he is taking his sweet ass time to turn, I was already in the intersection and got flashed.

Image attached below.

What should I do? Where do I stand with the fine? ($400 + 3 demerits)

post-73857-0-97322900-1354087487_thumb.jpg

Edited by S3RK

As above stated. The fact that there's no truck in frame either makes the argument a hard one to debate and chances of winning are extremely slim. Unfortunately just gota cop it on the chin

Hi guys, I just need to clarify my knowledge. As far as I know, provided the lights have NOT turned red (Green or Amber), and your front tyres have passed the line already, you cannot be fined. Am I correct?

I was driving home and there was a security truck in front of me turning left (as was I). When he entered the intersection there was still a green arrow, I'm practically right up his ass waiting for him to turn, he is taking his sweet ass time to turn, I was already in the intersection and got flashed.

Image attached below.

What should I do? Where do I stand with the fine? ($400 + 3 demerits)

i believe all four wheels have to be across the line by the time the light goes red

I've been told all four have to be clear over the line, so yeah. I pretty much "ran" the red... Ohh well :(

No reversing, as above, I ran it.

Thanks for your help guys! Much appreciated.

dude .... take a hint

You mean that a truck was turning and by the time the road was clear the light was red si you where reversing back to be safe

That's what happened isn't it?

not to mention the thread on a public forum with all the details.

sometimes stuff happens, unlucky. on the bright side you still have 2 arms, 2 legs and a car (or if you don't....it wasn't this red light's fault :) )

I'm actually surprised at those cameras, I've got a really high res photo, this is downsized a fair bit. Sunset is amazing :P

That's one f**king expensive photo though xD

Edit: Photo added!

post-73857-0-46003100-1354289549_thumb.png

Edited by S3RK

speaking of the photo....does it show a bus queueing right across the intersection, or did you go through after it had time to drive right across?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...