Jump to content
SAU Community

1990 R32 Gtr - Very Straight

atessa

By atessa,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

atessa Apprentice

atessa

Posted
Posted (edited)

1990 Nissan GTR

95,000k

Spark Silver

R33GTR block

Haltec ECU

eBoost2 boost controller

Apexi turbo timer

N1 Turbos

Ceramic coated dump pipes

3.5” Cat & full 3” stainless system

Brass Button Clutch Plate

HICAS lockout

Tein adjustable coilovers

18x9 Enkei RC5 hollow forged homologated race rims. Very light and strong.

New slotted brake rotors front and rear, Bendix ultimate pads

Cusco strut braces front & back

New timing belt

All new bushes, including rear cradle

All new fluids inc power steering, brakes, gearbox & diffs

300kph speedo put in with 14,000k on clock (still have original one too – changed out at 87,000k)

Runs an easy 270awkw @ 14psi

I have owned this car since import in 2005. My goal has been to keep it clean and tidy, with no holes in the dash or interior, no body kits or external mods. The only internal mod is a Momo wheel. Its a very original and clean car - even has original toolkit in the boot.

All engine mods have been to create a very driveable and responsive car. It doesn’t have mega power at ridiculous rpm, but it creates excellent torque and power that comes on quickly. It does this at low boost settings and will run all day every day. Engine work done 10,000k ago by Brad Sherriff at Boost Automotive Launceston.

Beautiful car to drive. Very regretful sale, but driven only 30,000k in 7 years I can’t justify keeping it.

Urgent Sale - $19,000 or best (and fast) offer.

Glenn - 0438 230 171

Hobart Tasmania

[email protected]

post-21882-0-95894900-1354180904_thumb.jpg

post-21882-0-32743200-1354180927_thumb.jpg

post-21882-0-90259100-1354180960_thumb.jpg

post-21882-0-47389100-1354181024_thumb.jpg

post-21882-0-44129400-1354181051_thumb.jpg

post-21882-0-80336200-1354181093_thumb.jpg

Edited by atessa
Link to comment
https://www.sau.com.au/forums/topic/414679-1990-r32-gtr-very-straight/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • Dose Pipe Sutututu
      WTB R32 GTR Window glass stabilisers

      By Dose Pipe Sutututu · Posted

      yeah, there's a country that recently started importing Skylines, I blame them.
    • GTSBoy
      WTB R32 GTR Window glass stabilisers

      By GTSBoy · Posted

      I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...