Jump to content
SAU Community

T3/T04E Ball bearing turbo & HKS Air filter

RallyArt
 Share

Recommended Posts

RallyArt Collaborator

RallyArt

Posted
Posted

T3/T04E Ball bearing turbo. Similar specs to GT25/30. . T3 Turbine , turbine wheel stage 3, A/R .63 for fast spooling matched with low back pressure, std T3 flange. Exducer diameter 2.25" Compressor A/R .50, 57 trim, 3" polished and bell mouthed inlet for higher flow and less turbulence for cooler air. 2" outlet, scroll internal deburred and detailed. Flows 45lb/min max. Ball race for the quickest spool and to reduce load on thrust bearing. Internal or external wastegate. Oil cooled. 1/8 NPT or std 2 bolt oil inlet. This turbo will suit from 1.8L + , Honda, Nissan, Holden, Falcon, Saab, etc. Awesome performance matched with reliability. Will run 30lb boost and support 500+ HP. This is not a rebuilt unit, it is 99% new(has been used in my gtr for two days as i think i still like twin turbos better so i am going to buy two hks t25/30 , but the cost is less than most rebuilt turbos.

Hks air filter used but it's brand new coz i bought it to fit on my car but i can't find the adaptor for it so ....selling for 100 only

Blitz Boost Gauge brand new read in bar $ 200

i am looking for $1400

but still be welcome to make me offers

i want quick sale

if buy 3 items at the time then i will take 1600 for 3 items

  • 3 weeks later...
  • 8 months later...
Blitz Grand Master

Blitz

Posted
Posted

Closed

Rallyart: You were pm'd about your trading here and informed that you are required to make a contribution before you can continue to post and you failed to reply.

Either make a contribution and register as a business trader or do not start another thread in the classifieds.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32GTR R200 reverting from Nismo centre to stock

      By djr81 · Posted

      It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • joshuaho96
      R32GTR R200 reverting from Nismo centre to stock

      By joshuaho96 · Posted

      Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Ozdavroz
      NC MX5

      By Ozdavroz · Posted

      Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
×
×
  • Create New...