Jump to content
SAU Community

Recommended Posts

i have a r33 gts, and recently put a m spots bodykit on her, but now it is way to low and scraps on everything, and was just after some ways i could raise the height, i was told coilovers but idk much about them and if they would raise it, cheers

Link to comment
https://www.sau.com.au/forums/topic/414721-r33-suspension/
Share on other sites

Those heights are just above the minimum legal height. Means that your car is lowered between 1 and 2 inches. You could try to source some new springs (say King's Springs) in standard ride height, or maybe in low (rather than super low) for a lot less $$ than a set of coilovers. Or you could get some BC BRs for ~$1200.

Link to comment
https://www.sau.com.au/forums/topic/414721-r33-suspension/#findComment-6651866
Share on other sites

  • 2 weeks later...

Stock body ftw. Unfortunately this is a losing situation, if you raise your car it will look ridiculous if you keep it how it is you will slowly destroy it. Unless you drive like its a low car even though its not low, it can be done just take the right angles nice and easy when faceing driveways, speed bump etc

Link to comment
https://www.sau.com.au/forums/topic/414721-r33-suspension/#findComment-6674358
Share on other sites

That's the problem with M sports kits. To pull that look off you do need some major low. I was going to buy one but honestly the height issue is why I didn't.

But in saying that I think you'll find that you'll struggle with most aftermarket kits with a lowered car. I had a GTR bar on and that ripped off due to a low ride height, currently I have a 400R and on my coils highest setting it still scrapes.

Link to comment
https://www.sau.com.au/forums/topic/414721-r33-suspension/#findComment-6676088
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...