Jump to content
SAU Community

Recommended Posts

Sure.

It's a super fine version of sand blasting. Most of the blasting material is water which means it can be used on the super soft metals. The guy then adds various different elements to the water to alter the abrasive effect. He uses a lot of the normal blasting medium (sand, walnut, etc). He normally hits it with the harsher abrasive first to clean it up then finishes it off with the fine stuff to create the like new finish.

I had 2 rocker covers, 2 cam gear covers, 4 exhaust manifold heat covers, 2 engine mounts, coolant and oil hard lines, inlet manifold plenum plus a few other random bits and it cost me $125.

The guy is here in Melbourne. His company is Auld Tyme Auto Resto Services and Wayne is the man to speak to. His number is 0416310662. Very nice guy and even picks up and drops off if he's in the area.

Highly recommend his work!

  • 3 weeks later...

So after about 7 or 8 weeks wait, my sexy, sexy slugs arrived-

20F75A88-CB35-4C0B-8E66-E8C5B3849856-300

3AD47DC3-252C-4E0D-B941-3B12FE26E8C5-300

65320665-0305-4CDC-A4DC-C99BF4E92D72-300

That's the positive side of things.

Negatives? I had hand surgery last week to fix some thrashed ligaments in my fingers and thumb from old footy injuries.

Suffice to say I'll be out of action for a while..

9FCBD147-F6B7-418D-8A4E-73F3750C7E18-300

7B7F67A0-AE6B-4E40-9C5B-24C66B758DFE-300

Might also be moving from Melbourne back to Shepparton soon which will be a bit of a speed hump as well. Until I get my 3 bay shed built with barn section in the middle to allow for a hoist........ can't wait.

Be great to be 3 kms from DECA and a lot closer to Winton too!!

Hooray for the pistons turning up!

Not so much for the hand surgery.....does not look enjoyable! Coincidentally my old man just had surgery to fix his carpal tunnel syndrome in his right wrist. Apparently its quite common in mechanics and tradies who often use hand tools. Shunting spanners, ratchets and breaker bars with the palm of your hand to crack nuts/bolts is a primary cause! So there is something to be weary of in the future!

  • 3 weeks later...

So officially moving back to Shepparton now. Gunna be a massive pain in my motivation.

New job, renting house with no shed until new house/shed built, another baby on the way, it's all happening! Will need to try VERY hard to keep on track. Won't get anything done until after the move because of my hand surgery.

Once shed is built and car is finished it will be awesome being back in Shepp. DECA, Winton, back roads!

I'll be working as sales manager for Subaru, Jeep, Dodge, Chrysler, Alfa, Fiat and Mercedes so if anyone needs a new car.....

  • 2 months later...

Long time no post! Been busy with busted hand, moving from Melbourne to Shepparton, new job, new rental house, building new house, etc etc.

Finally started on the car again last week. The engine should be finished the machining stage next week and then I just need to go and pick it all up then start bolting it together.

This is all I've done lately-

Started making the bolt ons-

null-6.jpg

These, look pretty-

null-7.jpg

null-13.jpg

null-14.jpg

Hopefully more to come soon.

Got a few photos of the machining process.

Bore and hone of block, head ported a little bit, head machined for 1mm oversize valves, block drilled for RB26 headstuds, reliefs grounds for sump adapter allen head bolts, Hardblok up to bottom of lower welch plug holes plus a few other bits and pieces-

dn1.jpg

dn7.jpg

dn.jpg

dn6.jpg

dn7.jpg

dn3.jpg

dn2.jpg

dn4.jpg

  • 4 weeks later...

Finally all of the machining work is done on my engine so I drove to Melbourne today to pick it all up.

Set up the "operating theatre" ready for business-

20130804_155258.jpg

All the goodies-

20130804_161506.jpg

Pistons individually weight matched (blueprinted in other words)

20130804_155931.jpg

Oversized valves in-

20130804_161759.jpg

20130804_161826.jpg

Tomei Poncams-

20130804_161919.jpg

Oil return galleries enlarged-

20130804_162019.jpg

Intakes opened and tidied up a bit-

20130804_162130.jpg

Exhaust ports opened up a bit-

20130804_162242.jpg

Spacer for timing belt tensioner-

20130804_163137.jpg

What all GT-R's should have had from factory.....-

20130804_163338.jpg

That's everything that the machinists have done, now it's my turn.

Didn't waste too much time on it but gave the crankcase a bit of a tidy up-

20130804_180423.jpg

20130804_180436.jpg

Also opened up the oil return galleries in the block to match the head gasket. The block opening is about 6mm smaller than the gasket which is just bloody stupid!-

20130804_182644.jpg

20130804_182657.jpg

Also opened up the water galleries in the block as well. you can't really tell but I've done the main curved bore water galleries as well-

20130804_182725.jpg

That's all I got done today, still a bit more cleaning up and measuring before I start assembly. Sorry for the photo overkill!

  • Like 1

I had an SR20DET that I was going to put into my other 1200 but reallocated all the funds to the Skyline. I'll revisit that project again at some point. When I have money again. Ie. never!

Great read mate, looks like it will be a very well rounded engine when its done. Great to see you doing it all yourself, would love to have the skillset that allows me to build my own engines!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep it's an r34. Usually people remove struts without removing the front upper control arm (fuca is what i assume this is?) So not sure why mine wouldn't fit. I know on my other car I did a similar job and it wouldn't fit until I removes the ball joint nut even though I didn't remove it prior.   The upper arm doesn't seem to be in the way (the part that's bolted to the chassis. The part that's bolted onto the j arm I'll check that out though.   I was going to compress the spring and put it in with the compressor attached but not sure if it will work  Haven't seen anyone do it.
    • I have a small lip on the boot of the E90 and I've been toying with the idea of trying to mould it in to the boot to remove the gaps. I guess shaving the seams? No idea what the terminology is here.  What I'm wondering is, if it's current double sided taped down, what would I do to more permanently attach it so it makes a good base for the filler? It only has edges so no way to bolt it down unless I add some braces. I've done a lot of fibre glassing in my time so that's nice and easy but I'm not sure what my options are here.  Sorry, this is the best pic I have and I'm 4 million ks from home ATM.  
    • Based on this comment I went googling. A052's in the sizes I want are certainly not cheap, but I couldn't find anything in the V70A anywhere. How much do they run/where do they get sourced from? From what I know (nothing but internet searches and reviews etc) the R888 has pretty much fallen off from anyone's actual use, and the AO52 is the king of "road legal" rubber. Nobody is driving around on their daily for Z221, AO050, DZ03G. At that point, for purely track only tyres - Why not buy actual slicks? Why does nobody actually do that anyway?
    • This an R34? It shouldn't matter though - it should be the same as on any of the others, and by "any of the others" I mean R32, because that is the car that I have had the front end apart on about 50 times this year. Sometimes, it is much easier to get the lower shock eye onto that pin when: a) you have the upper shock nuts backed off a few turns so you can wiggle it a bit more freely. When they are tight the bottom of the strut is much harder to move that _leeeetle_ bit you might need it to to win the fight. b) you have the outer bolt(s) from the FUCA out and so you can move the lower pin around freely too. Then, all you have to do is put the upper arm back on when you've got the rest back together, and this is where jacking under the balljoint can help.
    • One question before I make a bigger mess potentially, do I need to undo the nut on the outer ball joint? 
×
×
  • Create New...