Jump to content
SAU Community

Recommended Posts

NISSAN SKYLINE R32 GTR 1993 (silver)

CRANKED OUT 430 KW plus @ WHEELS

SPECS

ENGINE /INDUCTION

-RB26 DETT (after performance rebuild - done only 6,000 km)

- TRUST T78 BIG SINGLE complete kit (modified exhaust housing by Race Pace for quicker spooling - rather than a 5800rpm spool - -->3300rpm spool all the way to 8800rpm

-Apexi Cam wheels

-N1 PISTONS

-N1 RODS

-NISMO OIL PUMP

-NISMO WATER PUMP

-NISMO SUMP BAFFLE

-ARC 106mm drag front mount intercooler

-Splitfire grounding kit

-Twin Greedy BOV kit

-Greedy silcon blue piping kit throughout motor

-Twin APEXi air filter kit

- RACE RADIATOR TRIPLE CORE

-Fujitsubo Rm101 cat back exhaust - brand new with hks high flow cat

HANDLING / DRIVE TRAIN / AERO

-BREMBO BRAKES

-PROJECT mU 15INCH SLOTTED&DRILLED ROTORS

-Brand new twin plate Exceedy racing clutch (drives like standard)

-Tein fully adjustable coil overs

-Hks hypermax pillow balls tops

-Endless new pads all round

-IMPUL RS Hoshino 18x10 all round rims (deep deep deep dish)

-18 inch 265/35r Bridgstones tyres all round (brand new condition)

-Veilside front bar with N1 slots - exactly like Deans wide body Veilside BNR32

- Tomei - tinted rear tail light covers

-D-speed clear front indicators (not side ones)

- Carbon fibre bonnet with carbon splitter (brand new) AB style

ELECTRONICS / INTERIOR

-Power FC with hand held controller (inc boost control kit)

-3 Defi BF series gauges (boost / water temp / oil temp)

-Brand new BMW leather 2 tone re-trim (silver/titanium colour) through out car

***** much much more but cant remember******

433kw @ wheels on a mild 1.5 bar (PULP fuel) on Race Pace Motorsports in April 04

Currently @ ICE PERFORMANCE getting de-tuned for street use (300-350 rwkw)

$40,000 firm

----------------------------------------------------------------------------------------------

Knore: I have a few pix of the S15 at Glo I can email to you if Damien is happy with that?

Don't forget this was also a cover car in a Hot4s a few months back... maybe look on their site?

If you would like photos and have genuine enquiries, give us your email address and i will send through there. This site doesnt allow many pics to be attached as my files are huge,

If you would like photos and have genuine enquiries, give us your email address and i will send through there. This site doesnt allow many pics to be attached as my files are huge,

always on about how big your files are........ and you cant sell the GTR with my rims!!!!

  • 2 weeks later...

bump

My GTR is now off the market, too many people (aka tossers) asking to view and take photos. Wasting my day waiting for appointments that turn out like a friggin photo shoot. My S15 is still on the market, read post - modifications have changed to make it more streetable (price altered as well) Cheers

bump

My GTR is now off the market, too many people (aka tossers) asking to view and take photos. Wasting my day waiting for appointments that turn out like a friggin photo shoot.  My S15 is still on the market, read post - modifications have changed to make it more streetable (price altered as well) Cheers

I am starting to get the shits with some of you not interested in buying this car or for that matter any other car up for grabs because it's a big dollar unit. These guy's know if you are interested or not and so do I. Asking for private pics is gonna have to STOP. I want solid good pics up front because thats the only way this will change.

I'll be taking it up with the other mods.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No intention of driving the car the way it's set up now, just wanting to make sure I haven't made any mistakes along the way so that the tune can go smoothly, I don't want to waste anyone's time with stupid issues. And of course I intend to get it towed to the dyno in a completed state 😅 I have the base fuel pressure with the vacuum disconnected set at about 40psi, which I believe is at least relatively close to stock fuel pressure, maybe I'll have a fiddle with the reg and see what happens. For all I know I could be wasting my time with this and I should just plumb it in and see what the tuner reckons. I just find it a bit strange that it seems to be under so much load just free revving, but maybe that's just a result of the turbo slowing down the exhaust gasses and making a restriction in the flow, with no boost to compensate.
    • The boy just hit up google translate and it worked a treat, he said step one was "please urinate with precision and elegance", he then sent me the correct translation  I get some new loctite for the small fixtures tomorrow and get some "dort" going after that 🤣
    • Right, so is the fuel pressure the same as it was previously? If not, well, it's not going to work well. I can understand the theory I assume you are going for, which is: "Run it N/A, and if I have the original AFM, and same amount of fuel and intake air as previously, the fact there's a turbo in my exhaust should still make it run" Which it... might? Provided you don't actually change how much air or fuel is going into the car.. or getting out. But if you have changed that, all bets are off. What is the purpose to even have the car run this way? To get it to a tuner? And if the goal is to limp it to a tuner, you're still going to what - plumb up a whole intercooler system and new intake in the parking lot out front before your tune......?
    • Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
×
×
  • Create New...