Jump to content
SAU Community

Recommended Posts

1994 r33 gtst series 1 shell

Complied etc

needs paint all over tho

Straight no rust

Sunroof

Literally a shell would suit someone that either wants a sunroof or has had a smash and need rad support or a panel

100ono

R33 gtst ignition barrels and locks with key

Good condition

$100

R33 gtst side mirrors

$30 each

R33 series 1 dash

$50

R33 gtst centre console

Good condition

$40

R33 gtst cluster speedo

Auto great condition

105000kms

$20

R33 rear parcel shelf

$20

R33 complete carpet

$20

R33 doors

good condition

$30 each

R33 windows

Rear $50

Front$ 50

Drivers $40

Passenger $40

Little back ones $30 each

R33 gtst tail lights

Great condition

$30 each

R33 roof lining

$30

R33 glovebox

$20

R33 boot with wing

$70

R33 fuel tank assembly

$20

R33 handbrake

$20

R33 window motors

$35 each

R33 window switch

$20

R33 bonnet latch and cable

$50

R33 bonnet latch bracket

$40

R33 power steer reservoir

$20

R33 power steer rack

Great condition

$50

R33 washer bottle with motors

$30

R33 complete air con set up with everything!

$150

Motor etc are listed in separate post

So much more just can't think text me or pm me if you need anything

Gold Coast can post

0487924497

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...