Jump to content
SAU Community

Recommended Posts

Staying 2.6 with this car Paul or will you stroke it?

Needs to be a 2.6 for this one for the rally regulations. I believe if I put a 2.8 in it I would need to enter it as a z-tune, due to the year it was made it would bump me up into modern so up against R35's, Lambo's etc. Maybe in a few years the z-tune will get bumped back to early modern and would go 2.8 then.

I Like the colour 8)

:yes: Me too. Not quite KY0 but as close as I think you get in the standard 34 colours.

These tend to go well with the silver.... z-tune front bar, and mu secret s-tune copy bonnet

CIMG6162.jpg

CIMG6227.jpg

New bumper reo, EFI loom and a couple of other bits I didn't end up needing because the z-tune bar is one piece where the factory is two. I do have a factory bar that came with the roller in case the targa regs force me to go back to standard gear so will come in handy then.

CIMG6203.jpg

Engine and gearbox ready to be taken off the subframe and dropped off at Race Pace.

Was originally going to suck it and see if the engine was ok, but thought better and ended up getting it all pulled apart. Was the right choice because there was an 8 thou bend in the middle of the crank, a spark plug tip had come off and damaged the bore a little, and the turbo bearing cages were not in the best shape.

New R34 crank, machining, 87mm pistons up from 86.5mm, new bearings and consumables, reco of the turbos and a good check over everything else.

CIMG6175.jpg

And the finished product including wing. Once the front diffuser goes on it really completes the look but looking pretty tough at this stage.

At this point a lot of my time starts getting wasted staring at it from different angles.

CIMG6331.jpg

Cheers yeah there have been many late / all nighters, rolling around on creepers, misplaced tools, gritty eyes and grubby hands - and of course lots of swearing!

It's all worth it now its all up and running, engine running sweet, suspension set up right and blasting around the tracks having fun.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What could be causing my clutch problem besides a bad master or slave then? Both those parts are new 
    • Just came across this, but in QLD I start leave again in 2 weeks, if it is still available I might drive up and check it out Unless, @MBS206 do you live near here????, if so I could hit you up with a finders fee https://www.gumtree.com.au/s-ad/hope-island/auto-body-parts/nc-mx5-factory-hard-top/1328976391
    • My hold point for future mods is that I want a OEM detachable hard top first, but, finding one is a pain, MX5 Mania are looking for one for me, but, as hens teeth are more common, finding one in Australia is proving problematic  I can get a OEM one from overseas, hell, you can still get new ones in 'Merica, but, shipping is a absolute killer and I cannot justify the cost, or the risk of it being damaged during transport As for the aftermarket hardtops, whilst they do the job of being a hard top, and are fine for a track car, they don't seal well (read: leak like a sieve in the rain), and you need a plastic/poly rear window, plus they are a bolt in option only and not made to be easily removed I liked how the hard top on my NB could be fitted, and removed, by myself, in less than 5 minutes I know it sounds bad, but I'm waiting for someone to write off a car with one so I can swoop in on their pain, it will go to a good home though, so my guilt of this is tempered
    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
×
×
  • Create New...