Jump to content
SAU Community

P D S & Policy


GTR-N1
 Share

Recommended Posts

The information terry has given is available to anyone who wants to find it. He just made it easier to know where to look

But the information written on here is wrong...

Link to comment
Share on other sites

this will definitely be useful, as i may be inspecting a 34 next week!

The NRMA PDS has so many omissions in it > bit of a nightmare > had to rely on a 10 min phone conversation with staff.

Just Car PDS will be perused next - again, sorry for the delay to this thread as well as PMs.

Link to comment
Share on other sites

Well, just called up 2 brokers in Sydney. Asked about "nissan skyline".

1. Sorry we don't do those vehicles, we are a relatively small broker and only do mums and dads types of cars. =(

2. advice given: It would be much cheaper to go direct to the insurance company than to go through a broker for this type of vehicle.

also just tried to get an online GIO quote, BROKE THE WEBSITE

Learning as we go!

Edited by darksky34
Link to comment
Share on other sites

At last...

Just Car PDS details have now been posted throughout "Topic Headings" in Posts #2 to 11.

Another insurance company that covers 'grey imports' may be added to the above mix next week.

Link to comment
Share on other sites

GLASS BREAKAGE & LOCK DAMAGE

Shannons:- Once during a period of insurance, every glass panel is covered (fixed or moveable) without any need to pay "excess". Moulding is not covered if due to aging. Chips and cracks that do not extend through the entire thickness, or affect integrity, are not covered.

Locks, keys and barrels are not mentioned and are therefore unlikely to be covered.

See Terry here's where some of the information you are providing is incorrect.

* Shannon's will not cover sunroofs.

* Theft of keys and recoding is covered but of course limitations do apply.

I don't want to hack on this thread but I don't believe it's a good idea to be trying to provide this type of information if you don't work in this industry, especially if its incorrect.

Link to comment
Share on other sites

Read the PS on Post #1 again!

It says that the Shannons 2006 PDS will be updated!!!

They talked to me today, and they will send out the latest PDS on Monday!!!

According to the 2006 PDS, what I've posted is correct.

You've never asked me about any experience that I've had in dealing with car insurance. In fact, you've never even PM'd me either!

I've written psycho-legal reports for victims of MVAs and sat in case conferences with both traffic lawyers and survivors. Terms of reference (including car insurance and CTP) were then furnished to me, to subsequently write reports.

Link to comment
Share on other sites

There is a difference in working in the industry to dealing with them

So I've gone to 5 chemists i should list about medication advice? No.

Anyway, how you interpret a pds to how someone else does to how the company does are 3 different things and is best to leave it to the individual to ring the said company. In terms of wrong info you haven't asked me for correct info on Dawes and you have left if there, as you know I'm the manager there. I don't like to advertise that cause I get people pming me for quotes, cheap prices and advice etc.

Anyhoo, last I'll post in here and my last words of advice.

- ring each insurer for quotes. Shop around

- read their pds for exclusions, limitations. Conditions, features

-compare apples with apples

- don't be price driven

Contact insurance council of Australia for other insurers.

If you deal with an insurer, make sure they are part of the code of practice. More rules insurer deals with.

If you har a complaint, write to them first. Then if not satisfied go to higher management/IDR process. If

Not rectified ten financial ombudsman

What I'd do for this thread is link all pds and point out what pages all details are on so there is no chance of slight interpretation, make everyone read it themselves!

Cheers

Link to comment
Share on other sites

Read?... Read?... Read?

Read is different from understand is it not?

Isn't the intention of an insurance company to furnish a PDS to be understood as well as read?

Surely, an insurance company would never ever draw up and distribute a PDS that couldn't be understood! Never!

So if one is to understand a PDS, how can he/she not compare one to another before making a decision?

I've spent hours joining the 'dots' and the PMs I've been getting tell me it's been well worth it.

VOILA!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Gosh these bmw's are worse money pits than JDM's! I won't complain about my car anymore 😂
    • I'll just leave this quick tip here after reading your joys of getting the car in the air. It should take no more then 10 minutes to get the car safely up on stands.  So for the front, jack on the tow recovery points (marked in red). Put the jack stands under the lower control arm mounting point (marked in yellow). This photo is of a R34 GTR, however the process is the same. For the rear, jack under the diff (marked in red). Put the jack stands under the rear subframe or where the lower control arm mounting point (marked in yellow). Which point you use will depend on your stand, pick a nice stable point.  You've probably already read this but it's worth repeating. When jacking up the car or using stands, stay away from the chassis rails/pinch welds. Even the factory jack point, stay away from that too unless using a factory jack. I used those jack points for years without issue until I turned into an old man and bought a QuickJack lol. 
    • And this is where the leak is happening: https://www.dropbox.com/scl/fi/7h1vlmg2j5aa7rksvsjc9/IMG_9982.jpeg?rlkey=d3bnpau5f615zmxqmca0llvr7&st=kquvdxvs&dl=0   Apologies but it seems adding an image from a link does not work when the images are in Dropbox. 
    • Here are some pics from the auction: https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0   https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0
    • Hi all, From the western suburbs here. Just got my 2000 R34 GTT registered today! Got it imported from Japan through a mate who is doing them and managed to find a decent one. This one has only done 110,000 Km and had no body rust etc. so was very happy. I used to own a 25Gt back in 2015 (ate Ramen noodles for years to save up for it), but unfortunately, it got stolen TEN DAYS after I bought it!! Came back from Uni and the car was missing - cops found it in Springvale a month later with a lot of needles  😒 It was too late by then and I had moved on to a different car (300ZX), and after that one got broken into around 2018, I was in a very bad place and decided I would never buy a car again because it was just pointless!!! ~yeah, I have some very bad mojo~ 🥺 But now, with a stable job and a secure garage, I thought I'd get the R34 4D again but not as a daily! I love the R34s but a GTR is still a bit off my pay grade so settled for the GTT instead.    The first step for me is to get this car serviced and have all fluids, belts and spark plugs changed. I might do the brakes at one point too but atm they are fine, the fluids are what I want changed since this car probably sat in a garage for a long time. I'll then get some coilovers since the suspension needs to be changed anyway (the dust cover kit is disintegrating). I'll also upgrade my car alarm to a Viper system and then look at rims and tyres (I'm a sucker for TE37s - might have enough saved in another 3 years for that).   Today: I was planning to do the oil, coolant, air filter and fuel filter change this week. Started on the oil change today and MY GOD what a pain!! I used to think the 300ZX engine bay was cramped - oh I was so wrong! 😂 I've done the usual services on my cars before so it was not like I was going in blind. I looked up all the forum details about what oils to use, what coolant to use, what points to use to jack the car or place stands etc but I did not expect it to be this hard. Long story short - all I managed to do was the oil and filter change. I think I might end up taking it to a mechanic for a coolant change because my SCA stands and trolley jack just can't get far enough underneath to the cross-member and I don't want to be crushed under my favourite car....yet. Side note: In Dandenong, there used to be a shop that lets you hire their hoists - does anyone know if they have those around? I can't seem to find the Dandenong place anymore. I contacted them off FB almost 6 years ago and I'm not in it now. If anyone know of one, that would save me some time going to a mechanic for the basic services. Oil: Dark and gooey but no metal pieces. Oil Filter: Was a b***h to take off but no red flags Air filter: Yucky! Was black (Smells like fuel which makes me think it may have been running rich? - am I way off?)   Concerns: I have but one concern atm and that is that there was a very small amount of oil leaking where the engine and the transmission connect (Automatic). It may be the rear seal? It's not a massive leak and it does not affect the oil pressures or leak oil all along the driveway. It's been falling into the cover this whole time. I've taken the cover off so I can check the garage floor from time to time.  I also have not seen my engine temperature gauge ever sit at cold and slowly move up to the right spot, but that might be because every time I saw the car today, it was running. I'll check that again tomorrow. ATM it just sits right in the middle. I may just be paranoid but I don't want an overheating engine while my gauges say everything is fine. 🙈 Other than that, I'm very happy with the car! Feels like it's about time I went back to spending my weekends driving or cutting my arm on stupid sh*t in the engine bay.   PS: I will post a pic later on because I underestimated soooo badly today and it was dark by the time I finished! PPS: I broke the two damn plastic pins that hold the intake funnel section to the front bar. This is the piece made to bring cold air to the airbox. The connection to the airbox is fone, but the two clips just broke off! Should I be worried? Anyone else done that? 
×
×
  • Create New...