A.c.t. Want To Buy Thread

[D.I.Y. Mik]

Does anyone know where I might find some M12x1.25 fine thread nyloc or cone nuts?

To use on the bolts which connect the coilover to the knuckle on S13.

Tried specialty fasteners, they didn't have any.

Try a wrecking yard, get it off another car.

[StinkyPoo]

Sounds like the nut is specific to that coilover bolt. I think mine was just a nut with a flange.

[Got a Pulsar]

You said Flange. *Giggles*

[RosieR34]

B> Straight rolling shell of a R33 SR2. Genuine rolling shell. No history.

Paper work will need to be provided with purchase.

*Short story - I have an R33 SR2 with fairly bad chassis damage and costing a lot to repair from a shop. Need a 100% genuine rolling shell so RTA will pass the new body without any hassles.

Cheers guys !

[D.I.Y. Mik]

Want right upper trunion for r32 gtst.

Thats the big black knuckle up the top on the front suspension.

Anyone wrecking?

[Reese69]

WTB 1000cc+ injectors suit rb25det

[AnDreeZy]

anyone wrecking r32?

looking for stereo surround and bracket that holds stereo/climate control in place and reverse tail lights.
and a few other bits and pieces!

need to get this baby on the road!

[Sinista32]

Check this site. http://www.japaneseimportspares.com.au/home/

[dontyellpl0x]

Check this site. http://www.japaneseimportspares.com.au/home/

Those guys are great. Have heaps of crap and at pretty reasonable prices

[Sinista32]

They have heaps and heaps of stuff thats not listed on their site

and it doesnt look like they update the site often as a number of items I have bought are still up on the site ....

[RosieR34]

I'm at work atm and cannot access the site, but do they sell rolling shells? or issit more so bits and pieces?

[Sinista32]

No Sorry.

Does your current 33 have enough goodies to transfer into another shell ?

It wont be cheap.

I'm at work atm and cannot access the site, but do they sell rolling shells? or issit more so bits and pieces?

[RosieR34]

No Sorry.

Does your current 33 have enough goodies to transfer into another shell ?

It wont be cheap.

I've got everything I need to swap my bits and pieces into a rolling shell. My current 33 is in preistege condition bar the chassis damage. I just need a rolling shell to be straight so I can put my goodies in there. But really don't want to get a guttered 33. Hoping I can find someone who has recently just done a RB25 transfer and not wanting to touch anything else.

I've had quite a few people offer shells but way to much work for me to jusitfy their prices they're offering.

[Anfanee]

Has anyone got a stock R32 GTR air box laying around?

[Sinista32]

Think you need to find the "right" person to fix your issue on your 33.

Unfortuantely I dont know that person yet ..

[Sinista32]

ARC with me

Has anyone got a stock R32 GTR air box laying around?

[RosieR34]

Think you need to find the "right" person to fix your issue on your 33.

Unfortuantely I dont know that person yet ..

Haha yeah, if it was that easy to get a mate to re-wield the parts then I'll be laughing (I need engineer certs as well for it). Rolling shell seems to be the most promising solution unless work offers more work to which I can pay a workshop to fix.

Job security is my only factor atm - No money - no fix.

Was planning to put the car up on carsales Easter weekend, but after that criuse. Oldm8 Helga showed me a different side to her

[Sinista32]

I dont know how it was sold to you with a bent chasis. I know they'd never find the boddies if it happend to me.

So now you need to offload - probably at a big loss - and unless you dont want to be found in the bottom of a local lake you will have to fess up to the problem and provide an approximate cost to have fixed.

Lose/Lose

[RosieR34]

I got the dodgy done to me. The car did state it had an econmic repairable write off - however, that was 9 years ago. Given it was NSW you'd think it would've been fixed given they need an insecption every 12 months. (Dodgy certs). From what I felt about being done over, I would not do the same to someone else. I will advise them of the damage and will provide the reports as needed. But this car would be an amazing track car (Non rego'd). The inside is awesome and the only downside of it all is the damage done to the chassis.

Wouldn't mind seeing $4,000 for it, but who knows. I'm not a dodgy bloke regardless

I'm at a massive loss whichever way I turn. A lesson learnt as some would say.

[Sinista32]

I likely would not have picked it up either, so don't beat yourself up.