Jump to content
SAU Community

Recommended Posts

Hey guys,

I am having trouble locating a full C-West N1 bodykit for my 98 r34 gt-t. Anyone aware of a dealer that specialises in the sale of bodykits?

Cheers.

Genuine? If so you'll be paying a few grand. Recently dealt with Jerry and he can get it, but it's expensive as hell

Fairly sure they are for R33 front, rear and clutch. And a bag of new clips (6).

Driftworks sent the wrong ones and a refund also the are NOT ADR approved.

So im selling them very cheap.

$50 ono.

Thats or nearest offer, so if the nearest offer is $20.......

Looking for body parts for an R32 2 door:

- undamaged roof with drivers door pillar

- drivers side door complete with mirror

- drivers pillar internal door trim

- drivers rear quarter

- standard gunmetal would be a bonus

- happy to look at scratch adn dent panels

PM me prices/pics, I'm up north at the moment so can wait a while...

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

tumblr_m8hwfzMNQe1ruzdua.gif

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

Hey guys,

Looking for a passenger side window motor/regulator as when i wind my window down it goes full retard. You should never go full retard :\

Also, if anyone has a passenger side window weather guard (window seal rubber bit)

Cheers!!

32, 33, 34??? I got 33 parts

hi guys

am in need of a indicator/ hi beam switch as my hi beam broke last night and a new one from Nissan is way too expensive

also if any one has the water pumps from the washer bottle both mine have given up and I would at least like to get the front working

thanks heaps

hi guys

am in need of a indicator/ hi beam switch as my hi beam broke last night and a new one from Nissan is way too expensive...

Third from the bottom there is an indicator stalk. http://www.japaneseimportspares.com.au/nissanskyliner32standardpartsinside/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...