Jump to content
SAU Community

Recommended Posts

AFRs were low 10s under WOT which is too low imo. I admit he did fix some of the issues I just don't feel like it was a 100% job. It came back running less boost as asked with the same power so it was positive from that regard.

I'm pretty sure Trojan would have access to a dyno, just not sure which etc. Give John a call and ask. I found him always helpful and knowledgeable.

Trojan use Jake's Performance' dyno don't they?

NJR - Pete basically does most of his tunes a little bit rich to be on the safe side. Do you know what your AFRs were?

I had my Power FC tuned today at Autotech by Ed from Integra. Running a bit more boost now, feels and sounds like a totally new car.

Could not be happier :)

Edited by p1r4t8r
I had my Power FC tuned today at Autotech by Ed from Integra. Running a bit more boost now, feels and sounds like a totally new car.

Could not be happier :)

Hey Graham,

Met you y.day at Autotech, how did your final runs go?! Outa interest, have you got a turbo back, or cat back zhaust?

- M

hey mate!

Yeah, it made 195.5kW @12.5psi after the tune, but the power band is much nicer now, a lot more power from the lower rev range, don't need to wrap it out to get it moving.

Pretty sure it's a cat back.

How much did the 200SX end up putting out?

hey mate!

Yeah, it made 195.5kW @12.5psi after the tune, but the power band is much nicer now, a lot more power from the lower rev range, don't need to wrap it out to get it moving.

Pretty sure it's a cat back.

How much did the 200SX end up putting out?

Sweeeet, yah when I finally got a PFC, the extra ignition wound into it down low, made it much meatier and responsive.

The S14 made a paltry 190'ish@1bar due to the stock 10yr old coils breaking down. With the new turbo and usual pump, inj, FPR mods, we were hoping for 220-230'ish. Spitfires and a few weeks, we'll be back there :thumbsup:

  • 2 weeks later...
  • 1 month later...

Once again, Marc and the Boys at Belconnen Discount Tyre Service have helped me out again.

Honestly, i can't fault these guys. If you're northside, and want to be looked after for everything but the major stuff - give em a call. Marc has SydneyKid on speed dial if its needed and plus pervin' on his new Stagea is neat too.

Hi Guys,

I'm in the process of packing for the big move from Tamworth to Canberra (living in Queanbeyan/working in Fyshwick) to take up a new job, till now I was wondering where I could find someone who will know and importantly care about my stock R33.

After having a browse through this topic (which started in 2004) and printing off 54 pages I think I will get some answers. Thanks very much for the help guys, greatly appreciated.

By the way, if anyone is in Tamworth and needs a helping hand with a Skyline, or any Jap performance car for that matter, no one does it better than Matt O'Brien at Xcessive Performance - 02 6762 5711 - A real nice guy and top shelf work.

Thanks again for the tips ...

Billishere :)

Hi guys,

Anyone know where i can get my hands on an R32 GTR water pump in canberra? Keen to get it ASAP, either standard or N1. As if i'm not already in enough debt, damn it! Sorry not quite sure if this is the right place for posting parts equiries.

Any help here would be greatly appreciated. just post reply here or u3958752@anu.edu.au

Thanks

- Leon

Billishere, i ended up taking mine to Integra. Originally it was stock and Ed there took great care of it, could never fault their service. Since then i've had a few modifications performed there and had it tuned on the dyno. I've been extremely happy overall.

OzLeroy, try the wanted to buy forum, might get more luck there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
    • I see you've never had to push start your own car... You could save some weight right now...
    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
×
×
  • Create New...