Jump to content
SAU Community

Recommended Posts

Another place for northsiders is Skylines Performance..... The boys are real pro's and as the name says they specialise in skylines and have built and worked on some very tough cars, and phil has worked on and knows everything about skylines since the r30...phone number is 62550200.... But for full on engine rebuilds and the like chasing big hp, the man is jake... Jakes Performance on 6255 4545 (he doesnt do regualr service stuff)...

Another place for northsiders is Skylines Performance..... The boys are real pro's and as the name says they specialise in skylines and have built and worked on some very tough cars, and phil has worked on and knows everything about skylines since the r30...phone number is 62550200.... But for full on engine rebuilds and the like chasing big hp, the man is jake... Jakes Performance on 6255 4545 (he doesnt do regualr service stuff)...

Bought and service my skyline through these dudes! They know their s#$t about imports and specialise in skylines - any model!

  • 2 weeks later...

Figured this is along the same train of thought as before. Soon as i get my car passed rego i'll need to get an engine immobiliser and possibly alarm system fitted. I don't want anything to elaborate or expensive, it's mainly just to satisfy the insurer.

What systems (and prices) are recommended for the car, and where is a good place to have these items installed? I don't want some 16yo from JBHIFi stuffing around with my car if you get my drift.... :( thanks in advance

Just had my R34 serviced for the big run back to Cairns. Had it serviced by Joe Fister at the Mobil Servo at Garran. I have nothing but praise for the guy. Only required a basic service this time round but he is a Skyline fanatic. Many thanks to Jeremy for the recommendation. Motul 4100 Turbo light in the engine, Redline in the gearbox and Motul 300 in the diff. All good I say.

Cheers

Muz

Need some battery / electrical advice people......

I had a new Optima battery put into the Skyline when I bought it last October. All over summer I had no problems. I went away quite a few times in Autumn, so car wasn't started each time for 3 - 4 -, sometimes 5 days. Each time I tried to start it I thought "Oh s..., this battery is bloody flat". Luckily it whirred back into life slowly both times. After long weekend I was only away for two days and same thing....Last Friday I drove car to work and back again (about 50kms round trip), didn't drive the car Saturday and then yesterday lunchtime I had the slow whirring / almost nothing start again....

I'm thinking either battery or alternator. Thoughts???

Last week I disconnected the amp completely in case it was causing any problems, but there has been no change.

Should I take the car out to Battery Factory and ask em to check it out or

should I book it into a auto electrician? If so are there any recommendations for a auto electric shop either in Fyshwick or Belconnen that knows Skylines? Or should I just take it to Ed or Tez or Garran?

Thanks in advance gurus :):)

Need some battery / electrical advice people......

I had a new Optima battery put into the Skyline when I bought it last October. All over summer I had no problems. I went away quite a few times in Autumn, so car wasn't started each time for 3 - 4 -, sometimes 5 days. Each time I tried to start it I thought "Oh s..., this battery is bloody flat". Luckily it whirred back into life slowly both times. After long weekend I was only away for two days and same thing....Last Friday I drove car to work and back again (about 50kms round trip), didn't drive the car Saturday and then yesterday lunchtime I had the slow whirring / almost nothing start again....

I'm thinking either battery or alternator. Thoughts???

Last week I disconnected the amp completely in case it was causing any problems, but there has been no change.

Should I take the car out to Battery Factory and ask em to check it out or

should I book it into a auto electrician? If so are there any recommendations for a auto electric shop either in Fyshwick or Belconnen that knows Skylines? Or should I just take it to Ed or Tez or Garran?

Thanks in advance gurus :D  :D

take it back to where you got the battery, they usually have a fairly long warranty these days, they should be able to look at it for free and if the battery is faulty it falls under warranty, but if they tell you its the alternator, take it to the worshop/auto sparkie of your choice, hopefully for you its the battery as new alternators are $1200+ retail

  • 2 weeks later...
thanks heaps - will do - sheesh, better not be  new alternator, thought it was going to be expensive.

Well its all good----It was a faulty battery. Took the car out to Battery Factory last week. They replaced the Optima with another newbie and kept the Optima for testing. They tested it - charged - tested - drained - etc etc and turns out it was faulty. I am going out there tomorrow to get a brand newbie replacement.

Have nothing but praise for these guys - they are really helpful and loved the car!!!!

Recommended for sure - Battery Factory - near Forty Winks in Fyshwick

Sooo pleased it wasn't the alternator

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
    • Skip the concrete, we just need to smooth a field. Mark knows how to drive a grader Duncan   I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally... Duncan's already got a rally car on the premises to...
    • Well, yeah, the RB26 is definitely that far off the mark. From a pure technology point of view it is closer to the engines of the 60s than it is to the engines of the last 10 years. There is absolutely nothing special about an RB26 that wasn't present in engines going all the way back to the 60s, except probably the four valve head. The bottom end is just bog standard Japanese stuff. The head is nothing special. Celicas in the 70s were the same thing, in 4cyl 2 valve form. The ITBs are nothing special when you consider that the same Celicas had twin Solexes on them, and so had throttle plates in the exact same place. There's no variable valve timing, no variable inlet manifold, which even other RBs had either before the 26 came out or shortly afterward. The ECU is pretty rude and crude. The only things it has going for it are that the physical structure was pretty bloody tough for a mass produced engine, the twin-turbos and ITBs made for a bit of uniqueness against the competition (and even Toyota were ahead on the twin turbs thing, weren't they?) and the electronic controls and measuring devices (ie, AFMs, CAS, etc) were good enough to make it run well. Oh, and it sounds better than almost anything else, ever. The VR38 is absolutely halfway between the RB generation and the current generation, so it definitely has a massive increase in the sophistication of the electronics, allowing for a lot more dynamic optimisation of mapping. Then there's things like metal treatments and other coatings on things, adoption of variable cam stuff, and a bunch of other little improvements that mean it has to be a better thing than the RB26. But I otherwise agree with you that it is approximately the same thing as a 26. But, skip forward another 10 years from that engine and then the things that I mentioned in previous post come out to play. High compression, massively sophisticated computers, direct injection, clever measuring sensors, etc etc. They are the real difference between trying to make big power with a 26 and trying to make big power with a S/B50/54 (or whatever the preferred BMW engine of the week is).
×
×
  • Create New...