Hi-Flowed Turbo From Hypergear

[Sunkist]

Lol I'm pretty sure you were advised about that manifold abortion before it went on the car Toby

[Count Grantleyish]

What manifold you have?

[blah_blah]

Got a freebee off Stao. Just a manifold from China I think with longer runner and bigger pipes.

Makes the power though just quality isn't there

I'd rather jump off a bridge then take off that manifold.

Have welded up the crack and fingers crossed.

[Sunkist]

while it was on the car?

were worried about your diodes? or shorting things?

your a game man..

[Birds]

Car battery arc weld ftw.

[blah_blah]

Yesp welded it whilst it was still on the car.

Can't say I ever really want to take this manifold off the car unless it explodes or something

[Sunkist]

Why didn't you port the standard one? Been told it would've made the same power

[blah_blah]

Not according to Stao's test, makes more but not that much more

I think my manifold made about 340rwkw on his test car

[Sunkist]

Eh, fair enough, if it works I guess

[xALmoN]

if its free...

[hypergear]

Not according to Stao's test, makes more but not that much more

I think my manifold made about 340rwkw on his test car

yea 337rwkws on E85, and 360rwkws with the current high mount setup. Take 40kws off for pump 98.

Look this, it was dropped off by a 70 year old man this morning whom treated his car religiously. Fully on hand mirror polished, not a scratch or drop of grease on it.

Except his turbine wheel wasn't in the right place.

watch I turn this into a SS2.

[T.D]

G'day Simon,

Yeah I thought it was you!! I just couldn't remember the username

Thanks for chiming in mate, I'll shoot you a text now cos Saturday sounds good

[naga]

I got a 2IU highflow with CNC compressor wheel. Its response is pretty close to stock (You'll never beat stock response).

Boost spike in my graphs is from using stock actuator and trying to reach 14psi. Even with blocked boost signal stock actuator only holes 12.6psi. Got a very linear 224rwkw.

Edited December 14, 2012 by naga

[T.D]

Hey naga,

Is the CNC compressor wheel the same as the Hypergear SS hi-flow turbos?

[naga]

Hey naga,

Is the CNC compressor wheel the same as the Hypergear SS hi-flow turbos?

I believe so. You'll have to confirm with Stao though.

[T.D]

No worries mate, cheers.

Not too keen on the SS-turbos just yet, but I'll keep you in mind if I do decide to go down that path

[Odium]

Current tune is in orange.

Blue tune was with a buggered Wastegate and a few PSI extra boost. So the current tune is a lot more torquey and responsive.

[T.D]

Thanks Simon, looks great. Will check it out tomorrow, so just let me know where you're checking out the car for your sis and I'll be there

Thanks mate.