Sau A.c.t. - What Did You Do To Your Car Today?

[B-rice]

Practiced changing the valve stem seals on the RB30. Seemed like an easy task to do except a lot of things will have to be removed to get to them on the Neo.

[Got a Pulsar]

Any spare bits on the 30 you don't need like the intake manifold etc?

[B-rice]

Yh the top half is good but the bottom half is kaput, has a cracked piece.

[Got a Pulsar]

Yh the top half is good but the bottom half is kaput, has a cracked piece.

Hmmm... Wouldn't mind the top piece and maybe the throttle body too, I wanna get a larger throttle body (KA24) and bore out the inlet where it bolts on for more airflow.

Praps I can get it from you soon. (When I reclaim my O2 socket)

[Mitcho_7]

Anyone know where I can get an aluminium 3/8" NPT bung and a plug for it?

Going speed density soon on the evo and wanna get one welded into the cooler piping for the IAT sensor.

Also need a plug to block up one of the post cat o2 sensors I'm not using in the new exhaust.

Any suggestions on where to pick up either of these items would be greatly appreciated!

[..::R33GTS-T::..]

f**ked around with my idle speed, cranked it down so the timing belt doesn't f**k me off, sould have it booked into Trojan next week

and I got the GTR bov on, haven't been out to see how it sounds yet that was hard! the guy before me had a bigger bov on so he clamped the bigger hose down heaps, so it was all deformed, after a lot of heating and swearing I finally got it on

me : 1 - bov : 0

Edited January 3, 2014 by ..::R33GTS-T::..

[B-rice]

Anyone know where I can get an aluminium 3/8" NPT bung and a plug for it? <br />Going speed density soon on the evo and wanna get one welded into the cooler piping for the IAT sensor.<br />Also need a plug to block up one of the post cat o2 sensors I'm not using in the new exhaust.<br />Any suggestions on where to pick up either of these items would be greatly appreciated!

<br /><br />Pirtek in Fushwick or Industrial Supplies in Fushwick opposite shell. To get it welded I would do it for you just have to find time to sneak into my uni workshops otherwise if your in a rush Natrad (Phillip) can tig weld.

[B-rice]

EBay is also your best friend for the bungs.

[Got a Pulsar]

Got my DIY MIK Strut Brace on the Wagon this arvo.

All kinds of SexXxy.

Thanks Heaps Michael.

[..::R33GTS-T::..]

wow! that's a really good job mik! looks awesome

[THE34T]

That's one VERY clean engine bay mate ... did you do all that work? ... nice

Oh and the strutt brace looks great, nice work guys.

[THE34T]

BTW .. my old man had the same model SkyWagon ... no strut brace though ..

[Got a Pulsar]

Engine bay is actually FILTHY!!! It had spider webs near the oil filter.

Needs a good clean but so does the whole car...Meh. I'll get there.

Made some enquiries regarding Exhaust, Wheel alignment and Rego Inspection today...

Still a work in progress.

[THE34T]

Mate it's looking good ... not a lot of oil and sh!t in there, for it's age .. very nice.

[Got a Pulsar]

Could be alot worse. Quite happy with it really...

Just needs some lovin'.

[THE34T]

It's got the right dude for that I think ..

[luke gtr]

cleaned new car today.

washed, dried, cleaned door jambs.

will vac and clean glass next week.

[..::R33GTS-T::..]

Engine bay is actually FILTHY!!! It had spider webs near the oil filter.

Needs a good clean but so does the whole car...Meh. I'll get there.

Made some enquiries regarding Exhaust, Wheel alignment and Rego Inspection today...

Still a work in progress.

you could almost say your engine bay is cleaner then mine looking at those photos made me go out and clean my engine bay! haha its defiantly coming along nicely

[5hiv]

took my car out for a drive

Now im a newbie learning how to use a button clutch

Silly me thought something was wrong with the clutch that i installed lucky didnt pulled the gear box lol

[D.I.Y. Mik]

A button clutch.....

well there you go. i had one and hated it.