Jump to content
SAU Community

Recommended Posts

Nice work Chris! Is it a Bellmouth? Guessing you didn't break any bolts?

Yeah its a bellmouth. Jacked the car up last night and started spraying the wd40 every half hour. Must have had about 4 or 5 rounds and then a couple more this morning. Only took a ring spanner to break it and then fingers the whole way. I was pleasantly surprised after reading about some peoples nightmares... My struggles was with getting the cat mount to go around the new front pipe as it was a fair bit fatter then the stock system.. Had to get dad involved and he angle grinded part of the bracket out for me so that it fitted around the pipe. Once we had that sorted it was time to put it back together

Nice work you've done also :D

In fact it sounds like a few people have been busy bee's over the past few days..

Richard getting his hands dirty with an oldy but a swifty ;)

Ahh yes i remember grinding the mount.

The bellmouth is ok to fit, the jjr stainless split dump is a real pain because of less clearance and access to the nuts/bolts.

Like those ones on the engine side are a pain.

Anyway, good it went on easy.

John actually modded my JJR Bellmouth for ease of bolting.

(Heated up and hammered in the sides of the Bell a little) and he ended up just Welding the mount to the pipe.

Installed rear vision cover last night. Looks amazing. Also installed new Strut brace, it took a bit of love to get it on but it went on.

PICS???

is it just me or do you have a new photo in your sig everyday ?

Imagination is a wonderful thing Andrew, it leads to creativity, something the world needs a lot more of ... keep up the good work mate, the world needs you.

imagination.jpeg

Imagination is a wonderful thing Andrew, it leads to creativity, something the world needs a lot more of ... keep up the good work mate, the world needs you.

imagination.jpeg

I`m going to "imagine" I know what your talking about :P

well I cleaned it, went to get the ipad for a photo ( SLR is flat ) and then when I got back it was covered in pollen shit... and next doors chicken was there, so I took a photo anyway

I also soldered all the twist and taped cables for the stereo

post-127489-0-34617900-1389515986_thumb.jpg

Edited by ..::R33GTS-T::..

thanks a ton man! she`s getting there :)

that chook is awesome haha, it jumps the fence and plays with my little border collie, the puppy is somewhat scared of it haha

Last time I saw a Chook, (only a couple of days ago) it got it's head chopped off with an axe.

True Story.

Both Skylines are COVERED in a really fine Mist of Sap. :(

sounds like sandpaper when you wind the window down.

Today I did not much car wise other than pull off the passenger side mirror on the Wags and superglue the broken bolt mounts as they are all broken. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
    • I'm going to run hard lines front to back in the future. That should help dissipate a bit more heat. If not, a fuel cooler might be next 
×
×
  • Create New...