Jump to content
SAU Community

Recommended Posts

You don't shit where you eat from 5hiv. So is it the AC compessor gone?

haha

Yes the AC compressor is dead. I knew that was the problem could have just cut the belt off and drove around with no AC

  • Like 1

Today...

Swapped my Spare ECU into the Wags. (didn't fix the Intermittent Fuel Pump Priming) :(

Replaced a Green Relay in Behind the ECU which apparently pretty much controls everything. (May have fixed the priming issue) :)

Chucked in 2 spare Old Coolant Temp Sensors. (bled the air out)

Cleaned the AFM. (again)

Pulled out and cleaned the O2 sensor.

Tightened a couple of Rocker Cover Screws. (near Exhaust Manifold)

Removed the Exhaust Manifold Heat Shield and found the main Exhaust leak. (Pretty sure there should be bolts in these holes) :/

post-78856-0-52438200-1389952133_thumb.jpg

More jobs for the thread repair guy

Just make a list, get them all fixed at the same time, so its only one callout fee.

Did nothing to mine today.... too hot, later tonight when the little terror is asleep, ill take off the rear bar, tailights, do the last of the vynil stripping and the door rubbers have to be carefully removed.

Then its ready for final clean and de-waxing, especially the edges and where the rubbers were.

The list of sht to do, to prep it for paint is very long. Lets see how far i get before the missus realizes what im doing. :w00t:

Edited by D.I.Y. Mik

Tried to reduce scrubbing.. Tend to get a little bit on crappy roads... :( Moulded the front splash guards with a heat gun. Raised the rear of the car about 5mm.. Was going to wash it but I think its going to rain at some stage over the next 24 hours.. Fingers crossed anyway :yes:

Detailing the Swift - Typical bloody thunderstorm then hail ! (x2)

Had GTR up the top with the 34.

Started to rain, then hail. First put a doona over the GTR bonnet then Kicked swift out of garage and moved the GTR just as the 2nd hail storm hit.

Was over quick. Shuffling cars what a pain.

Also had Shawty's magna here trying to fix the rear drivers side window. Wont go up. Had to tape garbo bags over it.

Did this a couple of days ago

1560574_10151910800431699_673939638_n.jp

1544335_10151909913986699_1494250941_n.j

good work man! looks nice :)

today I changed the plugs and cleaned the vallycover/rockercovers :)

post-127489-0-99190500-1390102400_thumb.jpg

plugs 1 through to 6, kind of glad I changed them!

they look a ton worse in person :|

Thanks man,

Today.....

Pumped front and rear guards.

Changed front pads

Raised front suspension up 10mm

Bled brakes

Discovered 265 tyres on 10" rims fit inside pumped front guards

Still have soft brake pedal :(

Time to have fluid changed and pressure bled.

Agree with above. Soarer looks Tough! What are those wheels + sizes etc...?

Today SkyWagStag got her much needed new thermostat and Coolant after a good hose flushin'. :D But now my temp gauge in the cluster doesn't work. :(

Also played more AAC, TPS, Throttle stop adjust games and may have hit the sweetspot. No more chugga lugga when floored from a standing start.

Woot! I tells ya.

While out in the 33 I had some Dude in an Audi SUV thing rip past me in Fury as my relatively cheap old Skyline formed one lane before him. :nyaanyaa: Sucker.

Agree with above. Soarer looks Tough! What are those wheels + sizes etc...?

Today SkyWagStag got her much needed new thermostat and Coolant after a good hose flushin'. :D But now my temp gauge in the cluster doesn't work. :(

Also played more AAC, TPS, Throttle stop adjust games and may have hit the sweetspot. No more chugga lugga when floored from a standing start.

Woot! I tells ya.

While out in the 33 I had some Dude in an Audi SUV thing rip past me in Fury as my relatively cheap old Skyline formed one lane before him. :nyaanyaa: Sucker.

18x10 +22 on the back, same size to go on the front soon, tyres are 265/35

Fronts in that pic are 17x9 +40s

I got overtaken down the near Uriarra by a silver one like 40 mins ago, I was doing about 105kph, Id hate to know how quick he was going.. never saw him come up behind me

and got some photos of the car :)

post-127489-0-01208400-1390120849_thumb.jpg

Hey guys. Just in Philip. Walking into the walk on center I locked my car and noticed that my indicator light is blown... is the bolb the same a s the headlight? If not dies anyone know what product code it is? Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...