Jump to content
SAU Community

Is Anyone Very "in Tune" With What Pinging Sounds Like Inside A R33 Cabin?


Recommended Posts

My car used to miss on idle and never on boost. I pulled out the super expensive sparkplugs and replaced them with NGK coppers.

It has never happened again.

Yeah seriously better to make sure it's okay for even $150 to get it checked over by someone.

I personally wouldn't keep driving a car not knowing if it's about to blow or not. As the others have said an engine change will cost a lot more then an inspection and if it really needs a tune then that will still probably work out better then a new engine.

Don't buy a performance car if you can't maintain it

The car feels slow because you've retarded the ENTIRE map by maybe 3 or 4 degrees (depends how far you've rotated it). This will have a dramatic effect on the general feel of the car and response. You really only want to reduce the timing aroudn 4400-5200 as the turbo is coming onto boost (and stop the interpolation into R&R as it goes above 8psi). The problem with the R33 is that it isn't able to be flashed and you need a Z32 ECU to get Nistune. If you are sure you only want to potter around with 10psi or so I'd recommend getting an R34 SMIC and a generic mail tune/ECU chip.

LOTS of people aren't going to agree with me because if you are going to modify in the future you it will be worthless and you will end up getting nistune or Power FC or whatever anyway. This is what ended up happening to me. But if you aren't going to swap the turbo and put on a front mount then I reckon a mail order re-chip is the way to go. I was pretty happy with mine with 10psi and 180rwkw and the R34 SMIC. Adding a front mount did nothing but add a LOT of lag on the stock turbo.

my 2 cents.

Problem with a mail tune is again no one gets to see how his car reacts to the chip. Again all mail chips tell you to go get the A/FR's checked to make sure it's safe.

Toshi is a person who can flash your current tune and dyno it and re tune for as little as $700 re using the stock ecu.

His located in the business traders section and comes from Sydney. Not sure if that helps you because I'm using my mobile and can't see your location

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • $350 for a skid pan day at EC? WTF?? They used to be like <$100? We had track days at EC south and the full circuit for $350-odd WOOOWWWW COVID ruined us all.
    • C'mon Matt, our cars are classics now... *looks at 1kg BigW bottle mounted in front of seat* ah that's been expired for a while now... 😢
    • As above, can't rely on rubber belts too much when you're hitting OVER NINE THOUSAND !!!11!! revs, so electric conversion (Astra as mentioned above) is the way to go.
    • I highly recommend spending a lot of time searching the posts here. There is literally decades worth of information here, and whatever you can think of has been done (besides maybe quad-rotor AWD into a Skyilne chassis). Like, there was someone with an AWD Silvia and a crazy built SR20, and I've personally seen an R31 Skyline (Australian spec) with R32 GT-R running gear (including AWD).
    • Dragging some reo behind a ute or trailer will smooth out a dirt road, I've used reo a few times to do unsealed road maintenance when we didn't have any plant available  It's best done when the dirt is wet though, and then you just let it dry out for a day to harden up For wetting the dirt I've used some 44 gal drums in a ute or trailer, and a water pump connected to a hose with a old sprinkler tied to the reo to wet the material down whilst spreading Basically just drive slowly up and down the road a few times dragging a few sheets of reo wired together with the sprinkler wetting it all down as you go
×
×
  • Create New...