Its Dead, Tech Help Pls

[Reese69]

ok people everything was working perfect till.....

i disco the ecu (haltech platinum pro plug in), i then wired up a few gauges which worked, i have also pulled the doors off and boot lid off. (preping for paint)

i recharged the car batterie, then plugged in ecu and put the car onto reds and the car primes then the ecu cuts in and out and fuel pump primes again, this happend a few times then i turned car on clearly wasnt good. while pump was priming the relay in the boot was flickering each prime..

i put in the stock ecu which did the same,

whith the haltech in lap top would slowly connect, since then the only thing i wired was the gauges i have disco the gauges, this issues has stoped, but now the red light is coming up on the ecu and can not connect to laptop, (might be laptop) can ecu connect to lap top whith the red light on?

now fuel pump wont prime and when i click to start nothing happens motor wont even crank which i thought was on a diffent line?

some signals coming out of ecu are working but no fuel or anything.

i have check the replay in the boot and all main fuses in the boot i have already check the relay for ECCS.

any thoughts? this is killing me what am i missing,

i am running a R33 GTST 1995

[Reese69]

anyone..?

[Reese69]

just to adv ppl since 100 odd seen it and no reply - it was actually the battery - faulty battery - thats it - after testing all my fuses and things was just the battery

[Sinista32]

Thanks Reese - your first post doesn't point to it especially after the part about recharging the battery.

It's good to know tho.

[Reese69]

yeah i see what you mean thats why i tested everything fuses ect - then i recharged the batterie again and check voltage then again an hour latter and it was droppipng with out anything hooked up.

just anouying was something right there..