Jump to content
SAU Community

No Garage Cafe Meet This Month

emts

By emts,
in Victoria

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

soon it will be members only garage cafe meets

-_-

Monthly meetings have been open to the public for 7 years, that will never change.

I'm sure the entire Vic Forum gets that you don't think it's 'good value', even though it's one of the cheapest CAMS clubs in Victoria... So I'd suggest you go find another club to join and stop being a pain in the ass to this one.

Post another pointless comment/dig about the club - i'll start removing the posts.

Sunkist Grand Master

Sunkist

Posted
Posted

Monthly meetings have been open to the public for 7 years, that will never change.

I'm sure the entire Vic Forum gets that you don't think it's 'good value', even though it's one of the cheapest CAMS clubs in Victoria... So I'd suggest you go find another club to join and stop being a pain in the ass to this one.

Post another pointless comment/dig about the club - i'll start removing the posts.

Wow. I actually have to agree with you on this one!

w34ponGT Experienced

w34ponGT

Posted
Posted

im not diggin the club at all. maybe open the members events to public so we can at least see what you'se are secretly doing so then it will entice other people to become a member.

explain the costs.

$70 start up

$50 renewal?

and then $95 for yearly CAMS license?

what else?

Sunkist Grand Master

Sunkist

Posted
Posted

Lol discounts at a lot of reputable mechanics, some autobarns there are a lot of other things. Maybe have a read of the become a member thread. The fact that you actually can't get a cams license without being an affiliated club member is one point, the fact that If you are insured with Shannon's or just car u get a 10% discount on your premium which basically would cover all the costs for getting a cams license and club membership, let a lone all the other discounts..

Don't know if i should keep going or explaining to a lost cause :S

Longinus Community Regular

Longinus

Posted
Posted

Membership with other CAMS affiliated clubs is usually $100 or more. Hell, if you come to the SAUVIC annual dyno day, I'm pretty sure the sign up was only $50 (and if you wanted, a $50 dyno run as well!). You don't have to get CAMS, that's up to you and only if you want to get involved in great motorsport events. Also all the discounts more than make up for the cost of membership, the only discount I ever use is the Garage Cafe one.

Instead of disrespecting what is probably the most affordable and value for money club out there, why not go check out other CAMS affiliated clubs and see how much more you pay and how much less you get for the membership.

Also, there isn't much in the members section, events usually get posted up to the public forums anyway, but the details are usually withheld to entice new people to come along. The club is a friendly community, not some Illuminati-like secret hideout for vikings.

At the end of the day, if you don't want it, don't get it. Nobody is forcing you to be a paid member, all it does is enhance your time and experience with the club. Everything else is the same ;)

Down_Shift Veteran

Down_Shift

Posted
Posted

YOU CAN GET 10% OFF WITH JUST CAR??? WHY DIDN'T I KNOW THIS!

because you white people dont look hard enough for discounts lol

WHHAAATTT!!??

I can't seem to find anything regarding discount for justcar.....

blah_blah Grand Master

blah_blah

Posted
Posted

Deals and discounts from our sponsors & supporters:

Import Monster

Driver Dynamics

Racepace

Micolour

Pedders South Melbourne

Garage Cafe

DT Panels

Sabbadin Automotive

Tax Stuff

Chasers

Headspec

Centreline Suspension

DMD Tuning

Final Inspection

Waxit

Tyrepower Hawthorn

Immaculate reflections

Performance wise

Ultimate Precision Car Detailing

You'll make back your membership money and then some

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Pre-empting heat management  1. The Kraken manifold will be ceramic coated 2. Just purchased some peel and stick heat shielding stuff from car builders, I'll cover some of the firewall behind the dump and a little on the cam cover, this will be done prior to installation as I have ample room to get where I need to now before that realestate has more bits in the way, I'm also planning to modify the OEM heat shield to go back on, but that won't happen until after installation so I know where to hack it up, I'll also cover it with some some peel and stick to neaten it up after the hacking 3. As the dump is stainless with a flex joint coating isn't really a option, and wrapping isn't recommended for a stainless dump, so once it is installed I'll grab some shielding from car builders to cover the dump, as it has some stand off, it "shouldn't" cause any issues and it "should" just keep the radiant heat away from " melty engine bay stuff" Not for heat management, but I've grabbed some more black crinkle coat to paint all the shiny intake pipes, I'll pick the pipe work up prior to installation and use the paint booth and big oven at work to cure them, I'll then wrap them with some bubble wrap so they stay nice during installation
    • sammi_d
      SAUNSW - Cruise - Austi Beach Cafe - Sun 23rd Feb 2025

      By sammi_d · Posted

      We're back on, gang - Our yearly pilgrimage south to our favourite cafe for an awesome brekkie! Yes, that's right... we're heading down to Austi Beach Cafe for a breakfast run through the Royal National Park! Before you drool over your phones/keyboards, here are the details: Date: Sunday 23rd February Meet Location: Loftus Oval Carpark, Royal National Park, Sutherland Meet Time: Meet at 7:00am for a 7:30am departure Destination: Austi Beach Cafe, 104 Lawrence Hargrave Drive, Austinmer Map: http://tinyurl.com/saunsw-austicruise  RSVP: If you are planning to sit and have breakfast with us, please let us know, either by posting in the event, or by messaging us direct so we can confirm numbers with the venue. Itinerary: We will meet at Loftus Oval Carpark which has plenty of room and is low car friendly. This is a quick turn into the Royal National Park and some nice roads and scenery. After Stanwell Tops we will turn off and head onto the awesome Sea Cliff Bridge. Following this it is a short trip to Austi Beach Cafe. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • imonpcp
      a31 chassis pinout/cluster wiring layout

      By imonpcp · Posted

      YO- have been searching and searching for an a31 chassis plug pinout, or someone who knows which wire is for tach.  ceffy was flooded past dash during a hurricane.  having an electrical gremlin appear. tach is wonky reading consistent with a short, and on occasion the right side of my speedo lighting will flicker just for a second then go back to normal.  if no pinout available does anyone know if the tach harness opens or branches anywhere behind the dash? im suspecting a possible root behind the radio as there are more shorts in that area on the accessory loop.
    • Dose Pipe Sutututu
      How "plug and play" is the Haltech Pro for R33 GTST

      By Dose Pipe Sutututu · Posted

      Means something is not set up right, tune/calibration related.  
    • nismo_au
      Sau A.c.t. - What Did You Do To Your Car Today?

      By nismo_au · Posted

      Finally replaced the previous temporary mesh indicator surrounds (temporary was the last 10+ years 😂) with a 3D printed GTR style version for the front indicators. I think it looks a lot nicer than the old setup and at least the indicators now point in the correct direction rather than angled off. Needed a little bit of tweaking to deal with the intercooler piping but got there in the end. Old and new photos below. 
×
×
  • Create New...