R34 Gtt Camber Adjustment

[Shazbanger]

Chaps,

Got a couple of quick questions I'm sure someone will be able to answer. I've done a search, but there is a mixed variety of opinions/results, and I wanted to make sure before I start ripping shit apart.

1) I'm told the R34 GTT (2000 model) has factory eccentric camber bolt adjustment. Is this correct?

2) Working of the above being correct, how much camber adjustment will I get? I've read anywhere between 0.5 degrees, and 1.5 degrees, but more toward the lesser side of adjustment.

3) I'm running a set of 17" Work CR Kais, 17x8 +35. Given the relative sensible approach to these offsets, I'm imagining that with a small drop, not a huge amount of camber adjustment is going to be necessary, but I'd like to hear from others who have done similar.

4) If all the above is incorrect, and the factory system has 0 adjustment, a KCA348 control arm upper outer bushing camber correction kit will work, yeah?

Thanks in advance gents. Any advice would be much appreciated.

Cheers,

Shazza

[Shazbanger]

More of an FYI then anything, but I chucked the car up in the air and had a look last night. I can confirm that there is NO eccentric camber adjustment bolts factory on my car, and after speaking with Whiteline in length, I've opted for the KCA348 kit as a means to adjust. It doesn't give a HUGE amount of adjustment (Only between 0.5 - 1.0 degrees neg) but according to my calculations with my wheel offsets/width, that should be enough for the time being.

Here is a picture of the kit installed. It is blurry, but you get the idea.

Cheers,

Shazza

[GTSBoy]

You didn't even say whether you were asking about the front or rear in your OP.

[Shazbanger]

My bad.

I was referring to Front.

Cheers

[ARE31]

I'm running 18x9 +35 all round on my R34 without any camber adjustment on the front. I have HKS coilovers but they're not real low at the moment.

[ishyz34]

I'm running 18x9 +35 all round on my R34 without any camber adjustment on the front. I have HKS coilovers but they're not real low at the moment.

need to get myself a lip that looks like yours, scraped my front bumper really hard the other day, I nearly cried! where did you get it from?need to get myself a lip that looks like yours, scraped my front bumper really hard the other day, I nearly cried! where did you get it from?

Sorry to bombard your post.

An adjustment at bob jane stopped my rear rub, perhaps ask them?

[ARE31]

need to get myself a lip that looks like yours, scraped my front bumper really hard the other day, I nearly cried! where did you get it from?

Sorry to bombard your post.

I bought the lip from a member on here. He had bought it for his wife's R34 but then decided to sell the car & all the bits he had bought for it.