Jump to content
SAU Community

Recommended Posts

that the details of it, looks like it would be worth a try for $100

UP FOR AUCTION IS FOR ONE PERFORMANCE TUNE TO CONVERT YOUR NON TURBO N/A ECU TO TURBO,,,, GAIN 10 KWs AT THE REAR WHEELS ITS A 95-98 OCTANE TUNE AND LETS YOU GET THE BEST OUT OF A VL WITH AN INTERCOOLER FITTED AND MORE PSI .. THIS IS ALSO IDEAL FOR A HI COMP TURBO CONVERSION WITH NO KNOCK SENSOR ETC JUST A TURBO / TURBO INJECTORS AND PREM FUEL IS NEEDED..

FITTING INSTRUCTIONS ARE SUPPLIED

REQUIRES YOUR STOCK N/A ROM TO BE UNSOLDERED AND THE NEW SOCKET SUPPLIED FITTED THEN YOU CAN PLUG THE NEW TURBO PERFORMANCE EPROM IN ,

ONCE CONVERTED YOU MUST RUN VL TURBO BROWN TOP INJECTORS AS THE N/A TYPES WILL NO LONGER RUN,

ONCE FITTED YOU WILL BE NOW RUNNING TURBO FUEL AND IGNITION MAPS + HIGHER FUEL CUT ,

dont know lol spose ill give it a shot and put it on the dyno and see how it goes , yeah i did got a hight mount turbo is the same size as a 35/40, 50mm gate ajustable fuel reg and front mount just need too do injectors and ecu but dont want too spend too much

So you have a ebay copy turbo and a ebay copy gate/manifold?

ebay special chip sounds like it'll fit in nicely!

However if it were me, it's $100 wasted. Better off putting it into the pokies. A proper tune/ECU will cost $2000+ - fact of life.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Definitely needs a hard top
    • Nah, shouldn't have made any difference. Reds on, or car running, should be same same for what you were doing. 
    • Should be able to source 200 cell R32 cat... unsure how easy it would be to get it to Malta though.
    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
×
×
  • Create New...