Jump to content
SAU Community

Wrecking R33 Skyline Gts-T In Sydney - Modded


Recommended Posts

Yo, I've got a maroon series 1.5 R33 Skyline for wrecking here in Sydney. It's got a stuffed/blown auto gearbox, slightly dented roof and no rego so i'm just wrecking it !

If you're after anything listed here or any other random parts, reply or flick me a PM

post-35556-0-95342700-1355748072_thumb.jpgpost-35556-0-38843500-1355748083_thumb.jpgpost-35556-0-47407300-1355748244_thumb.jpg

Pickup in Sydney, or I can post pretty much everything anywhere in Australia. It's got some aftermarket parts, listed here first:

Aftermarket parts:

Kinugawa T67-T25G high mount turbo kit. Includes everything you'll need - Turbo, XSpower highmount manifold & 44mm wastegate (plumbs into split dump), 3" stainless split dump pipe, oil feed lines, hoses/clamps etc. Turbo is in immaculate condition, less than 2000km old. XSpower manifold is HPC coated black, also less than 2000km old - $1700 ONO

There's a massive thread with loads of info on these turbos here: http://www.skylinesa...dynamics-turbo/

post-35556-0-28419300-1355745834_thumb.jpg post-35556-0-63041800-1355746002_thumb.jpg post-35556-0-03117500-1355747125_thumb.jpg

HKS Hiper D height and damper adjustable coilovers, front and rear. Great condition - $700 ono

post-35556-0-17165600-1355744734_thumb.jpg

Carbon fiber bonnet, suit series 2 R33 (with s2 grille) Some small cracks / patches in the clear/coating. Includes bonnet pins - $400 ono, pickup only !

post-35556-0-89688500-1355747060_thumb.jpg

Apexi Power FC ECU to suit R33 Gts-t rb25det, good working condition - $800 firm

post-35556-0-95993300-1355744037_thumb.jpg

3" high flow catco cat, flanged to bolt right up to r32, r33 Skylines, S13s etc - $100

post-35556-0-13572600-1355748329_thumb.jpg

Also have a set of brand new / unused Nismo 555cc injectors. Still in boxes, with the nismo paperwork etc - $600 (these are still $900+ fron nengun, without shipping)

post-35556-0-96320500-1355744294_thumb.jpg

X-Racing FMIC & piping kit, suits R33 Gts-t. Good condition, includes all pipes and hose clamps - $250 - pickup only

post-35556-0-21024100-1355744134_thumb.jpg

SF-DIS-005 Splitfire coil packs, suits S1.5/S2 R33 Gts-t (with no ignitor) and R34 GTR - $400

post-35556-0-26235500-1355744158_thumb.jpg

Z32 AFM and matching plug, good working condition - $180

post-35556-0-55441800-1355744212_thumb.jpg

Oil Catch can - $40

post-35556-0-95836300-1355744182_thumb.jpg

XTR turbo beanie, the mesh on the underside is a little worn in one area. Will still work great though - $60

post-35556-0-02856000-1355747137_thumb.jpg

Set of 4x 17" R34 GT-T wheels and tyres. Wheels are in good condition, only a few tiny areas of gutter rash

Tyres still have pretty good tread- all 4 are at approx 50%. Unfortunately one of the tyres has a screw stuck in it and was (very) slowly losing air - $400. Can post if required !

post-35556-0-60148800-1355744465_thumb.jpg

PWR auto transmission cooler & hoses - $75

post-35556-0-59755800-1355744567_thumb.jpg

Blitz pod filter & adaptor, etc - $25

post-35556-0-47085500-1355748064_thumb.jpg

Also have a fiberglass R33 GTR front bar (with lower lip), no indicators/lights, painted Silver. Great condition - $400 ono Pickup only

post-35556-0-24947900-1355749128_thumb.jpg

Walbro fuel pump in R33 Gts-t cradle - $100 ono

(no pics yet)

-----------

The engine has approx 187,000k's on the clock and was running great. Rocker covers painted maroon

I did a compression test last week and it was great - bang on 150psi on all cylinders - $900 ono for the bare engine

Auto gearbox is still here but 3rd and 4th are blown (on the dyno) good for parts maybe? - $50

Exterior Stuff:

Series 1 headlights - sold pending payment

Series 1 reo bar, cut for FMIC - $150

Series 1 front bar (small section of the back of the lights was cut for FMIC, doesn't effect operation - $250 - pickup only

Front guards - $75 each

Bare nose cut/radiator support - $150

S1 grille - $60

Side mirrors - $40 each

Tail lights - $40 each

Standard sideskirts - $150

Engine bay stuff:

Aircon condenser - $125

R33 aircon compressor pump - $90

R33 power steering pump - $100

R33 alternator - $90

S2 (no ignitor) Rb25det engine loom - $150

Engine Mounts - $75/pair

Fuse box lid - $20

Radiator overflow bottle - $20

Washer bottle & motors - $25

BM44 ABS brake master cylinder - $50

Brakes/driveline:

Front calipers - SOLD

Rear calipers - $130

Front rotors, used but good condition - $50/pair

Rear rotors, used but good condition - $50/pair

Front castor rods - $75/pair

Front lower control arms - $70 ea

Front upper control arms - $50/pr

Front 5 stud hubs - $50 each

Rear lower control arms - $40 each

Rear 5 stud hubs - $140 pair

Handbrake drum assembly incl cables - $150 pair

Rear differential (4.3) auto diff - $250

Driveshafts $75 pair

Spare space saver wheel - $50

Also have a full set of standard suspension - $150

Interior:

Complete set of floor mats, good condition - $80

S1 Front seats, good condition, small bit of wear/hole on the driver's side in the usual area - $120 - pickup only

Complete set of S1 door trims, great condition (x4 pieces) - $100 - pickup only

Passenger side window motor - $50

Drivers side window motor - $100

Driver side window switch (12 pins)- $75

Instrument cluster, approx 187,000km. tacho not working properly (jumping around) - $50

Painted dash surround & auto gear stick surround - $120. Includes boost gauge mounted in the cluster surround

Centre console, with good lid/latch - $50

Seatbelts (full set) - $100

Ignition barrel + door barrels & key - $90

Link to comment
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • The two diagrams are equivalent. The R32 one is just one sheet out of about 3 showing everything in the whole car all at once. And without knowing the functionality that occurs in the modules, they are both equally opaque.
    • 8v - 2.48ms 9v - 2.15ms 10v - 1.74ms 11v - 1.41ms 12v - 1.15ms 13v - 0.99ms 14v - 0.89ms 15v - 0.82ms 16v - 0.81ms I'm running these values on my RB20 Neo with 570cc Denso R35 stock jets and it's great. Also bought a set for my Legnum VR4, love these injectors!
    • Thanks for your reply,  Those blue/green wires running to the actuator aren't attached to anything, so I'm not sure how the central locking is still working. I will have to take a good look tomorrow, I don't have the car with me. After googling it seems like a pretty common aftermarket actuator which even uses the same green/blue wires the immobiliser required. i'll test everything tomorrow and if it's working i'll melt the solder, strip it, resolder and neaten it all up with some heat shrink. I don't have to understand it if it works hahaha I just don't want a fire/ short circuit. That R32 diagram looks more like a continuity chart? Can you make sense of this form the R34 manual? 10V is probably due to very flat battery, i'll recheck as well tomorrow, I did have to jump start it haha. Thanks again!  
    • So, COM doesn't mean comms. It means common. What common itself means will depend on the type of device. For a two directional actuator (ie, one that can push and pull on the same output rod) then the common will typically just be the earth connection. There will be at least 2 other wires. If you put 12V on one of the other wires, then the actuator will push. On the other 12V wire, it will pull. Can't quite make out what is going on with the wiring of your actuator. It appears to have several wires at the actuator plug, but there only appears to be 2 wires where its loom approaches the door control module, with at least one of the others cut off. I don't know these actuators off by heart. I'd have to look at a wiring diagram for one before knowing what the wires were about, and that's despite me having to replace one in my car not all that long ago. Just not interesting enough to have dedicated memory set aside for trivia like that any more. That actuator is an aftermarket one, not the original one, which probably died and was replaced. That might require some sort of bodge job on wiring to make it work. Although nothing should justify the bodginess of the bodge job done. As to the soldering job on the door module's loom plug. Ahhahhahaha. Yes, very nasty. Again, I cant tell you what any of those wires do. You'd need to study the R34 wiring diagram (if you can find one that shows the door module). I don't think I have any. I'd have to study the R32 diagram to start to understand what mine is doing, and again, even though I've had a problem with mine for the last 25 years (where it locks the passenger door when the driver's window reaches top or bottom of travel) I'm just not interested enough to try to to work it out. So long as it's not burning down, it's fine with me. Here's the R32 GTR diagram, which, confusingly, has rear door lock actuators and window motors on it!! As you can see, unless you understand the functions of the door lock timer and the power window amplifier, you'll never be able to work out how it works just from the diagram. I don't imagine that the R34 one is any better. Hopefully an R34 aware bod can help. FWIW, the two wires that are cut and joined look like they are both power supply - so hopefully it is not fatal to join them. The 10V you measured on the cut off free end of one of them is concerning. You'd expect 12V, and it might be the reason for the bodge job joining them together.
×
×
  • Create New...