Jump to content
SAU Community

Recommended Posts

Yo, I've got a maroon series 1.5 R33 Skyline for wrecking here in Sydney. It's got a stuffed/blown auto gearbox, slightly dented roof and no rego so i'm just wrecking it !

If you're after anything listed here or any other random parts, reply or flick me a PM

post-35556-0-95342700-1355748072_thumb.jpgpost-35556-0-38843500-1355748083_thumb.jpgpost-35556-0-47407300-1355748244_thumb.jpg

Pickup in Sydney, or I can post pretty much everything anywhere in Australia. It's got some aftermarket parts, listed here first:

Aftermarket parts:

Kinugawa T67-T25G high mount turbo kit. Includes everything you'll need - Turbo, XSpower highmount manifold & 44mm wastegate (plumbs into split dump), 3" stainless split dump pipe, oil feed lines, hoses/clamps etc. Turbo is in immaculate condition, less than 2000km old. XSpower manifold is HPC coated black, also less than 2000km old - $1700 ONO

There's a massive thread with loads of info on these turbos here: http://www.skylinesa...dynamics-turbo/

post-35556-0-28419300-1355745834_thumb.jpg post-35556-0-63041800-1355746002_thumb.jpg post-35556-0-03117500-1355747125_thumb.jpg

HKS Hiper D height and damper adjustable coilovers, front and rear. Great condition - $700 ono

post-35556-0-17165600-1355744734_thumb.jpg

Carbon fiber bonnet, suit series 2 R33 (with s2 grille) Some small cracks / patches in the clear/coating. Includes bonnet pins - $400 ono, pickup only !

post-35556-0-89688500-1355747060_thumb.jpg

Apexi Power FC ECU to suit R33 Gts-t rb25det, good working condition - $800 firm

post-35556-0-95993300-1355744037_thumb.jpg

3" high flow catco cat, flanged to bolt right up to r32, r33 Skylines, S13s etc - $100

post-35556-0-13572600-1355748329_thumb.jpg

Also have a set of brand new / unused Nismo 555cc injectors. Still in boxes, with the nismo paperwork etc - $600 (these are still $900+ fron nengun, without shipping)

post-35556-0-96320500-1355744294_thumb.jpg

X-Racing FMIC & piping kit, suits R33 Gts-t. Good condition, includes all pipes and hose clamps - $250 - pickup only

post-35556-0-21024100-1355744134_thumb.jpg

SF-DIS-005 Splitfire coil packs, suits S1.5/S2 R33 Gts-t (with no ignitor) and R34 GTR - $400

post-35556-0-26235500-1355744158_thumb.jpg

Z32 AFM and matching plug, good working condition - $180

post-35556-0-55441800-1355744212_thumb.jpg

Oil Catch can - $40

post-35556-0-95836300-1355744182_thumb.jpg

XTR turbo beanie, the mesh on the underside is a little worn in one area. Will still work great though - $60

post-35556-0-02856000-1355747137_thumb.jpg

Set of 4x 17" R34 GT-T wheels and tyres. Wheels are in good condition, only a few tiny areas of gutter rash

Tyres still have pretty good tread- all 4 are at approx 50%. Unfortunately one of the tyres has a screw stuck in it and was (very) slowly losing air - $400. Can post if required !

post-35556-0-60148800-1355744465_thumb.jpg

PWR auto transmission cooler & hoses - $75

post-35556-0-59755800-1355744567_thumb.jpg

Blitz pod filter & adaptor, etc - $25

post-35556-0-47085500-1355748064_thumb.jpg

Also have a fiberglass R33 GTR front bar (with lower lip), no indicators/lights, painted Silver. Great condition - $400 ono Pickup only

post-35556-0-24947900-1355749128_thumb.jpg

Walbro fuel pump in R33 Gts-t cradle - $100 ono

(no pics yet)

-----------

The engine has approx 187,000k's on the clock and was running great. Rocker covers painted maroon

I did a compression test last week and it was great - bang on 150psi on all cylinders - $900 ono for the bare engine

Auto gearbox is still here but 3rd and 4th are blown (on the dyno) good for parts maybe? - $50

Exterior Stuff:

Series 1 headlights - sold pending payment

Series 1 reo bar, cut for FMIC - $150

Series 1 front bar (small section of the back of the lights was cut for FMIC, doesn't effect operation - $250 - pickup only

Front guards - $75 each

Bare nose cut/radiator support - $150

S1 grille - $60

Side mirrors - $40 each

Tail lights - $40 each

Standard sideskirts - $150

Engine bay stuff:

Aircon condenser - $125

R33 aircon compressor pump - $90

R33 power steering pump - $100

R33 alternator - $90

S2 (no ignitor) Rb25det engine loom - $150

Engine Mounts - $75/pair

Fuse box lid - $20

Radiator overflow bottle - $20

Washer bottle & motors - $25

BM44 ABS brake master cylinder - $50

Brakes/driveline:

Front calipers - SOLD

Rear calipers - $130

Front rotors, used but good condition - $50/pair

Rear rotors, used but good condition - $50/pair

Front castor rods - $75/pair

Front lower control arms - $70 ea

Front upper control arms - $50/pr

Front 5 stud hubs - $50 each

Rear lower control arms - $40 each

Rear 5 stud hubs - $140 pair

Handbrake drum assembly incl cables - $150 pair

Rear differential (4.3) auto diff - $250

Driveshafts $75 pair

Spare space saver wheel - $50

Also have a full set of standard suspension - $150

Interior:

Complete set of floor mats, good condition - $80

S1 Front seats, good condition, small bit of wear/hole on the driver's side in the usual area - $120 - pickup only

Complete set of S1 door trims, great condition (x4 pieces) - $100 - pickup only

Passenger side window motor - $50

Drivers side window motor - $100

Driver side window switch (12 pins)- $75

Instrument cluster, approx 187,000km. tacho not working properly (jumping around) - $50

Painted dash surround & auto gear stick surround - $120. Includes boost gauge mounted in the cluster surround

Centre console, with good lid/latch - $50

Seatbelts (full set) - $100

Ignition barrel + door barrels & key - $90

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Where abouts in Sydney? S1 grille still for sale and no clips broken?

St george area. Still for sale, 2 of the 5 clips are missing, still clips up fine to the car

Can you pm me your contact number please

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
    • Temu raptor, lol. At least the owner isn't your typical ranger danger lot
×
×
  • Create New...