Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 1 month later...

Been following this thread on and off for years. And reading the chassis developments makes me feel alot. Sympathy that its happenex to a car youve put alot of time and effort into. Aswell as dread a Nd panic for my on gtr. Makes me want to run outside and check every inch of mine

  • 2 weeks later...

Been following this thread on and off for years. And reading the chassis developments makes me feel alot. Sympathy that its happenex to a car youve put alot of time and effort into. Aswell as dread a Nd panic for my on gtr. Makes me want to run outside and check every inch of mine

Well my case is quite bad to the point that I don't think its safe driving it - hence the decision to part with it. These are old cars now just gotta maintain them even more. Restorations and rebuilds are almost inevitable now if you want to keep the car in good nick.

ants - any tips on removing side skirts and not screwing up the clips, need to paint mine up

clips are easily replaceable and cheap as chips - I found that using WD40 on the adhesive made it loose without ruining the paint and use plastic scrapers. Just ensure you clean up the WD40 after you have removed the adhesive bond.

Yeah he is. He already started.

this is accurate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...