Jump to content
SAU Community

Can Anyone Tell Me What Needs Replacing For This Error Code?

newv35owner
 Share

Recommended Posts

newv35owner Contributor

newv35owner

Posted
Posted

Hey,

We have managed to source a person who could read the engine error codes on our V35.

We have got the engine error code of C1132. After doing some research we have found that it means:

Engine signal 3 - Based on the signal from the ECM, ABS Actuator and electric unit (control unit) judges that the fuel cut system is malfunctioning.

We have also been advised that one of our speed sensors is not reading correctly - which they think could also be causing this error code.

Not knowing any import people in Canberra - coming from SA on holidays - we are having a little difficulty working out what it all means and how to fix it. If it is just the speed sensor we are able to replace this as we have a spare but would like to be certain before we drive the car long distance.

Thanks in advance.

newv35owner Contributor

newv35owner

Posted
  • Author
Posted

It is difficult to explain but we have had it confirmed that the error is definitely not from the gearbox.

Sometimes when you first start driving the car it will get stuck in first, after a few mins it will change gears by itself. But when it is stuck in first you can't even change the gear manually. The person who got the code for us said that even with the car off one of the sensors was reading 62rpm.

Do you think this could be a gearbox issue or steer me to someone in Canberra that could help? We haven't had much luck calling around or asking the ACT boys in this forum thus far. We tried the Nissan service centre and they said they can't help with an import.

newv35owner Contributor

newv35owner

Posted
  • Author
Posted

I have searched through the forums and haven't been able to find anyone that has had the same issue or error code come up. We will continue our search for a reputable mechanic in Canberra or try to call our mechanic in SA to see if he can help us as to what the code may mean.

Found lots of bad remarks on the CVT box though. As i mentioned above we had it confirmed by the scanning that the gearbox is still fine and the fluid has been changed and fully serviced with the liquid gold. That was only 3000kms ago and there was no sign of wear or damage to the box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...