Jump to content
SAU Community

Recommended Posts

to get the r31 started, i took the battery out of my s14. without thinking, i just connected up the leads.

thus putting them on the wrong way. switched them around, all good. the car started.

however, non of the electrical features now work. lights, interior stuff, dash. ect.

i have already checked the in cabin fuses but they are fine.

i know very little about r31s, i can't seem to fine any other fuse boxes.

what do you guys think i broke?

Link to comment
https://www.sau.com.au/forums/topic/416178-battery-on-the-wrong-way/
Share on other sites

to get the r31 started, i took the battery out of my s14. without thinking, i just connected up the leads.

thus putting them on the wrong way. switched them around, all good. the car started.

however, non of the electrical features now work. lights, interior stuff, dash. ect.

i have already checked the in cabin fuses but they are fine.

i know very little about r31s, i can't seem to fine any other fuse boxes.

what do you guys think i broke?

Oh no

Mate you could have killed off half the car !!

the car is neg ground not positive so anything with a relay or fuse , fuse link or diode ( alternator) could be smoked

your going to have to go thru one thing at a time and check the lights too

Your damn lucky if the ecu doesn't have a fried trace or two it would be a miracle of Christmas

Best of luck

I remember when i was about 12 my dad thought he would play mechanic and put a new battery in his old el wagon, nek minnit put it on the wrong way and fried the ecu, 700 dollars later mother wasn't impressed :P

A 12 year old should never take the opportunity (behind Dad's back - but still within earshot), to ask Mum if he can go over to his mate's place when there are chores to be done; that Dad told him to do.

Dads can only 'single-task'!!! :mad:

R31's have a fusible link and relay box behind the RH headlight. You may have fried a fusible link, maybe. But i doubt it.

The other fuse box is inside, RH side of the steering column. This is more than just a fuse box though. This is called the HEC or Hybrid Electronic Control unit. Its also considered to be the SMJ or Super Multiple Junction. Only R31's had them and they are not the most awesome of things. But they dont usually fail either.

This unit has a few purposes; its a place for all the fuses and power relays (can't see the relays without removing the unit), it is the major intersection for everything electrical in the car, and it also houses the electronic control module that controls; dash lights, tail lights, wiper control, interior light, trip computer etc. I dare say you have fried this unit.

If you've still got brake lights and head lights but not much else then its a good indication that its cooked.

You can replace just the electronic module or the entire HEC. Should only take half an hour to replace the entire HEC. Grab one from pick a part.

R31's have a fusible link and relay box behind the RH headlight. You may have fried a fusible link, maybe. But i doubt it.

The other fuse box is inside, RH side of the steering column. This is more than just a fuse box though. This is called the HEC or Hybrid Electronic Control unit. Its also considered to be the SMJ or Super Multiple Junction. Only R31's had them and they are not the most awesome of things. But they dont usually fail either.

This unit has a few purposes; its a place for all the fuses and power relays (can't see the relays without removing the unit), it is the major intersection for everything electrical in the car, and it also houses the electronic control module that controls; dash lights, tail lights, wiper control, interior light, trip computer etc. I dare say you have fried this unit.

If you've still got brake lights and head lights but not much else then its a good indication that its cooked.

You can replace just the electronic module or the entire HEC. Should only take half an hour to replace the entire HEC. Grab one from pick a part.

ill check it out however, nothing works including brake/head lights.

Lights should still work if they are direct fed from a battery source. They are not polarity dependant. So if there not working they must be fed from a Control Module that could be fried.

You might have to get a multi meter out and start checking where the 12v goes into and where there should be an output.

You might need a wiring diagram.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
×
×
  • Create New...