Jump to content
SAU Community

Recommended Posts

few things to clear out

R32 GTS4 Front Diff 4.375

ring and pinion in excellent condition

$350 pickup western sydney or postage at buyers expense

R32 GTR Dump pipes

no longer needed as upgraded to aftermarket dumps

$20 pickup only western sydney

Rb26 Airflow Meters

pair of R32 GTR afms thats no longer needed

been sitting in the shed for past year as i had upgraded to nismo's

$50 for one or $80 for both pickup, postage at buyers expense

Tomei Metal Intake Manifold Gasket (new)

same as this: http://justjap.com/s...&cat=318&page=2

$100 pickup or postage at buyers expense

R33 GTST Black Front Grill (new)

brand new black R33 grill with all clips

$100 pick up or postage at buyers expense

R32 Hicas Bar (new)

black in colour, never fitted

$60 pickup only western sydney

Alpine Type-R Splits 6.5"

recently removed from my car, surplus to requirements

comes with x-over box, woofer and tweeters

has a small crease on the woofer from hitting door speaker trim hence the cheap price

$100 pickup or postage at buyers expense

Fibreglass R32 GTR Wing

was painted gunmetal however not factory KH2 colour, paint in good nick, but few small cracks

$80 pickup only western sydney

Secondary Bonnet Restraint

required at CAMS drift events, and circuit events

Designed for stock bonnets/latches, easy and clean alternative compared to bonnet pins.

approximately 30cm long, still enables bonnet to be partially opened for extinguisher access

features covering over the whole cable, and ends, to protect paintwork

stainless hardware

high strength 7x7 multi strand stainless cable.

comes with a free battery triangle sticker.

$35 posted or $30 pickup western sydney

R32 GTR Stock Airbox

changed to pod filter setup and hasnt been used for a few years, all clips intact etc, in decent condition, no air filter included

good setup to avoid heat soak from the engine and clearing defects

$150 pickup western sydney or postage at buyers expense

R32 Centre Console Trim (not the one around the radio/gauges)

$30 pickup only western sydney

R32 GTR Bootlid

gunmetal colour but not factory KH2

has a small bent edge below the badge

$70 pickup only western sydney

Apexi EL2 Boost Gauge + Control Box

white-faced electronic gauge, comes with wiring loom, works fine except doesnt light up at night

never bothered looking at why as i had another spare boost gauge which i installed

$60 pickup western sydney or postage at buyers expense

R32 GTR Castor Rods

has offset bushes installed

$50 pickup or postage at buyers expense

pm me

Edited by BWRGTR
Link to comment
https://www.sau.com.au/forums/topic/416331-shed-cleanout/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
×
×
  • Create New...