Air Idle Control On 26 With Single Throttle Body

[chavey]

Hey guys I'm in the process of getting this 26/32 together and I'm a bit stuck on what to do with the factory air idle control or (aac valve) when I put the hypettune plenum on with the single throttle body. My thoughts where to get rid of it all together as i have done away with the vacuum log that runs along the head anyway and just use a universal idle air control valve from haltech. I have a haltech platinum pro plug in ecu so i'm just wondering if any of you know how the haltech idle control would be wired in and set up instead of using the factory set up? would i just use the factory loom and plug straight into the new idle control off the aac harness?

Cheers

Ben

[GTSBoy]

Question is its own answer?

[chavey]

not really if it does work that way then i suppose but ive never played with anything like it before so in theory it sounds good to me i just want to know if it would be that easy.. If its just an on off solenoid im sure it would, just wanting to see if any gurus here had some words of wisdom they could share with me on the matter..

[brad 110]

The Haltech idle control block uses a 4 wire delco idle motor (the gtr is two wire BAC valve). I'm not convinced the platinum nissan plug in has the idle A,B,C,D idle driver outputs available.

[chavey]

I see, yeh the web site specifically says used oem idle control.ill have to just make the standard one work i guess.

[k_d]

Its a lot less hassle to make the standard stuff work than to wire-in the haltech stuff.