Jump to content
SAU Community

Name And Shame

staticc

By staticc,
in New South Wales

 Share

Recommended Posts

staticc Collaborator

staticc

Posted
Posted

Hope everyone is enjoying their holidays. I just got back from a week in Melbourne with family.

Just so happens I was on the Hume, in Victoria, overtaking a couple of trucks doing around 110kms in my missus I30. Next thing you know a R33 flys up my ass doing about 140kms thinking that he can sit up there about 3cms to push me doing his speed. I wasn't going to have it so I slowed down to 100kms to match the truck's speed, and he really hated it. When I let him go, he thought it be a great idea to cut the truck and then me off, to then brake to cause and accident. Well lucky I had my wits about me and didn't but slowing down to 60kms in the right hand lane of the Hume is the best idea this guy had.

I really don't care, what really gets me is that the truck drivers were parsing me for doing what I did and no doubtlessly thinking another dick head in a skyline. Things like that ruin out reputation and being a proud owner of a better skyline then this bloke (r32 gtr) it hurts.

So if anyone sees this guy, don't be afraid to tell him to f**k off to a commode and stop ruining our reputation. I will be posting this in the ACT and VIC forums because no doubt he was off to summernats.

The car is a blue r33 gtst with a white flame decal on the bonnet and stupid cartoon fast and furious crap down the sides. And the license is Ytb 465 Vic plates.

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/
Share on other sites
France Community Regular

France

Posted
Posted

Hope everyone is enjoying their holidays. I just got back from a week in Melbourne with family.

Just so happens I was on the Hume, in Victoria, overtaking a couple of trucks doing around 110kms in my missus I30. Next thing you know a R33 flys up my ass doing about 140kms thinking that he can sit up there about 3cms to push me doing his speed. I wasn't going to have it so I slowed down to 100kms to match the truck's speed, and he really hated it. When I let him go, he thought it be a great idea to cut the truck and then me off, to then brake to cause and accident. Well lucky I had my wits about me and didn't but slowing down to 60kms in the right hand lane of the Hume is the best idea this guy had.

I really don't care, what really gets me is that the truck drivers were parsing me for doing what I did and no doubtlessly thinking another dick head in a skyline. Things like that ruin out reputation and being a proud owner of a better skyline then this bloke (r32 gtr) it hurts.

So if anyone sees this guy, don't be afraid to tell him to f**k off to a commode and stop ruining our reputation. I will be posting this in the ACT and VIC forums because no doubt he was off to summernats.

The car is a blue r33 gtst with a white flame decal on the bonnet and stupid cartoon fast and furious crap down the sides. And the license is Ytb 465 Vic plates.

Omg... I saw the very same car today when I was buying lunch. He was at Smithfield NSW at 3pm. I cringed at the car when i saw the fast and furious white flames, had a look at the driver and he looked like a twat wit sunnies on.

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/#findComment-6685374
Share on other sites
staticc Collaborator

staticc

Posted
  • Author
Posted

Yeah its not a good looking car. I have copped abit for posting this, was quite angry at the time.

Mainly because everyone thought I was bagging out r33s. I was only on his. My uncle has a sweet r33.

Yeah I think it will be the last time I do it. Next time ill just ring the police and keep my mouth shut lol.

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/#findComment-6686430
Share on other sites
533 RYC Proficient

533 RYC

Posted
Posted

Yeah I think it will be the last time I do it. Next time ill just ring the police and keep my mouth shut lol.

Agreed, best course of action. I recently had an incident in my wifes Cube, & with my 2yr old daughter in the back. Turns out knobheads in VD SuperShiite wagons don't like doing 50 km/h in a 50 zone. They like to weave around & hang over the double lines (but not overtake, cause that's breaking the law!), then after 3.5km, just before the end of the road with this complete idiot so far up my butt, he decides to start flashing high beams. So i stop & get out. He roars past, but I got a good look at him, plates, make of vehicle & colour. Went straight to my local & reported him. Officer rang me afew weeks later & told me I got all the info right, they had a chat with him. He claims his wife was using the car that night...............GUTLESS PRICK..............!

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/#findComment-6690429
Share on other sites
GTR-N1 Grand Master

GTR-N1

Posted
Posted

Courtesy needs to come from all parties.

* the driver in the overtaking lane needs to complete the overtaking manoeuvre without fuss

* the one about to overtake should keep his distance from the one ahead whilst he accelerates.

I learnt my lesson on the Hume and other 2 lane highways after copping stones from trucks and accelerating cars ahead. Tailgating has caused me to lose a fog light or windscreen before.

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/#findComment-6691959
Share on other sites
Tai1or Made Grand Master

Tai1or Made

Posted
Posted

How f**king irresponsible are you? You slowed down to the trucks speed? I don't even know where to start, you need to hand your licence back buddy.

How irresponsible are you?

You actually read OP's post.

Link to comment
https://www.sau.com.au/forums/topic/416431-name-and-shame/#findComment-6694103
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      There are a few different ways of doing it. I'm currently running two 1000cc pre-TB nozzles and PWM the pump for control. I'll be moving over to a constant pressure system and direct port. I'll run the pump off a regular relay, have it cycle on roughly 5psi before I start injecting to build pressure and then PWM a WMI solenoid (It's basically an injector that can take a lot of pressure and not corrode with water and meth.) The solenoid feeds the 6 direct port ~200cc nozzles. I'll also keep one ~250cc pre-TB nozzle to help keep IAT's in check.  Safety will be a little different as well. I used to use a pressure switch but will be moving over to a pressure sensor between my solenoid and nozzles. I'll trigger my solenoid and if I don't see specific pressure within a specific timeframe (e.g 100psi within a second, 175psi within 2 seconds), I kill it and revert back to non WMI maps the same way I did it before with 4D in Haltech. I was just figuring out the timers in my ecu last night. They made that a little more complicated than I would have liked... I wish Haltech offered a larger set of logic/math functions like other ecu's do. I can't do very much with just AND's and OR's.  I've been asked to do fuel/ignition mapping on a medium bore engine at work in May (192L V16). Being the only programmer in my region and having went and opened my mouth about knowing the ins and outs of fuel/ignition mapping, I have now been deemed an expert. Fun fun. The entirety of the logic and algorithms are programmed in C on a PLC. As I spend more time figuring it all out, I like what I see and eventually I may consider doing the same as a pet project to replace my ecu.   
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      This would be interesting, would you feed it via a 2nd row of injectors? Or just usual WMI nozzles?
    • Milkmun
      Magnetic Drain Plug Snapped in Half

      By Milkmun · Posted

      Cut sump up and extend. Win win 😂 
    • SLVRBAKSLPZ
      Recommended Torque: RB26/30 ARP 1/2 Head Studs

      By SLVRBAKSLPZ · Posted

      All, What's the recommended torque for the 1/2 head studs for RB30 twin cam conversion with RB26 head?  
    • Duncan
      Magnetic Drain Plug Snapped in Half

      By Duncan · Posted

      also, we need to know which solution worked....
×
×
  • Create New...