Jump to content
SAU Community

Recommended Posts

Hey SAU,

Wasn't sure where I should post this, so I thought I'd post this here as I have a N/A.

Anyways, I just needed some thoughts on how to go about this.

Do you guys reckon it is possible to basically swap out from motor to diff? so in short from N/A AWD, to Turbo RWD.

I understand that most sensible people would just buy a GTT but the car has very strong sentimental meaning, so reselling is not an option unfortunately.

Thanks guys

  • 3 weeks later...

i would use a turbo diff as that one i guess is built for n/a power plus sharing the load with a front diff. so it cant be very strong. you may need a different front cross member and hub assemblies to. just be extra weight to leave them. p.s. i was the same until someone offered cash and a lot. im glad i didnt do the conversion :)

  • 10 months later...

You should either get a C34 Stagea RB25DET engine or turbo the current engine. I'm doing the turbo the current engine route.

Just follow the "How to turbo your N/a slow slug POS skyline" thread. It has a break down of all the parts and costs.

If you hunt around you can get all the parts for under $1000 and bolt it on ur self. You will need to get a tune as the N/a tune is not suited for turbo.

Posting here because of Google...

R34 GT4 coupe to turbo and keeping AWD.

How much does something like that cost? parts and labour

I love the r34 GTT but I hunger for AWD grip

Fell free to buy my GT4 :)

If it's so easy why isn't everyone doing it?

Because no one can be bothered unless they really want to & most R34 GT/-t s are RWD to start with.

There have been a few R33 GTS4s converted to AWD RB25DET using Stagea gear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...