Jump to content
SAU Community

Recommended Posts

I think it's good value and if I was in the market I'd probably jump on it.

The only thing is to make sure it's a genuine V-Spec 2.

It doesn't take much to add wheels and Brembo brakes.

The spare wheel is yellow and I always thought the V-Specs got the larger black space saver to fit over the bigger brakes, I know mine has.

Yet, both my ADM's have the smaller yellow spares.

The blue ID plate on the fire wall will confirm its legitimacy.

Cheers,

Bob.

Thanks for the tips Bob. Quiet informative there.

BTW my car is a late 94 Model and only came with the yellow space saver not sure it really means much.

Cheers,

Anthony

V Specs IIs Should have a yellow space saver, however they are different to the stock GTR space saver. As mentioned, they are 17 inch and are very bulbous (approx 1 inch wider) to fit over the brembos.

Additionally, they are supposed to have a thick yellow piece of foam (approx 1 inch) that goes on the floor around the rest of the boots floor. This is to raise the floor level up, to the height of the wheel laying on its side. This makes the whole floor flat once the carpet goes on. That foam is apparently very rear and quite sort after in Japan. As over the years, they get thrown away and lost etc. So it is good to see that in the above link, that the car has this foam.

  • Like 1

V Specs IIs Should have a yellow space saver, however they are different to the stock GTR space saver. As mentioned, they are 17 inch and are very bulbous (approx 1 inch wider) to fit over the brembos.

Additionally, they are supposed to have a thick yellow piece of foam (approx 1 inch) that goes on the floor around the rest of the boots floor. This is to raise the floor level up, to the height of the wheel laying on its side. This makes the whole floor flat once the carpet goes on. That foam is apparently very rear and quite sort after in Japan. As over the years, they get thrown away and lost etc. So it is good to see that in the above link, that the car has this foam.

there is usually that foam on import monster....

for around $600 before shipping....

Those photos look good Bob, should turn up really well. One thing that annoys me is the factory paint on the inside edge of the boot that goes all the way around (Forget the name). Would be nice if there was some thicker paint there from factory!

Those photos look good Bob, should turn up really well. One thing that annoys me is the factory paint on the inside edge of the boot that goes all the way around (Forget the name). Would be nice if there was some thicker paint there from factory!

Yep.......... Spoke to my guy about that.

He said he can spray some "dry clear" around the boot lid to replicate the factory OEM look.

  • 4 weeks later...

Bob did they spray the roof and passenger quarter as there no join for the clear to finish at?

No........ They were very clever in the way they blended it into the line on the edge of the roof.

Here are some pics with the addition of factory weld spots replicated perfectly.

Bob.

post-78207-0-06186200-1428284993_thumb.jpg

post-78207-0-75821100-1428285007_thumb.jpg

post-78207-0-23347700-1428285009_thumb.jpg

post-78207-0-98322500-1428285010_thumb.jpg

post-78207-0-52039500-1428285012_thumb.jpg

post-78207-0-83540600-1428285013_thumb.jpg

post-78207-0-88514300-1428285014_thumb.jpg

post-78207-0-26990200-1428285017_thumb.jpg

post-78207-0-48873800-1428285042_thumb.jpg

post-78207-0-48545800-1428285043_thumb.jpg

post-78207-0-30805000-1428285044_thumb.jpg

post-78207-0-24435400-1428285045_thumb.jpg

post-78207-0-17834300-1428285046_thumb.jpg

post-78207-0-65776600-1428285046_thumb.jpg

post-78207-0-70373400-1428285047_thumb.jpg

post-78207-0-90252000-1428285048_thumb.jpg

  • Like 2

Guys, just letting this group know I might soon be putting an EOI out on my VSpec. Half way through building our 1st home and might need to free up some cash. Im not 100% sure as yet, but just thought I would give this group a heads up. Will be doing everything in my power not too obviously ;)

  • Like 1
  • 1 month later...

My vpsec came with the 3 iece side skirts but no n1 front bar. From what I understand any gtr could get nismo extras added when buying the car for extra cost. Mine has the nismo skirts, dump back exhaust and strut braces and all look like they have been there since new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...