Jump to content
SAU Community

Replacing Hid Headlights With Halogen

ObiV35

By ObiV35,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

ObiV35 Apprentice

ObiV35

Posted
Posted

So, apparently my car (I'm not the first owner since import) managed to sneak through compliance without having the HID lights removed. Only problem is that I've moved interstate (NT) and they do a compliance check (in addition to roadworthy) when you transfer registration from interstate.

I'm told I'll either need to have them modified to be self-levelling and have spray washers installed, or change them back to halogen. I assume changing them back to halogen is cheaper, however what will I need to do this apart from disconnecting the ballast? Since pretty much nobody does this willingly I can't really find out what to do and would rather do it myself if it doesn't require actual rewiring (as opposed to changing a harness or something).

sonicii Veteran

sonicii

Posted
Posted

I imagine you will need some sort of adaptor to fit the halogen lamps into the existing holder. (Some dodgy compliance workshops glue them on!!)

Then cut the 12V cables that feed the ballasts and fit an appropriate halogen lamp connector.

If you are Planning on re-connecting the HIDs then just splice into the 12V cables rather than cutting. It will make swapping back easier.

ObiV35 Apprentice

ObiV35

Posted
  • Author
Posted (edited)

Sorry if I wasnt clear; I did already take it in (to the compliance place), and was told as above. Thanks sonicii, I'll have look around and see if there's any places that are confident of doing it I guess.

Edited by ObiV35
  • 5 weeks later...
Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted

What they havent told you is that it is illegal to fit a different type of globe into a reflector designed for HID, so fitting the self levelling thing is the only correct thing to do... Just dont tell them that theyve asked you to do something illegal or theyll get upset ..

i'd just take out the HID bulb and use the fog beam instead. There is no reason why you cant use the fog beam as a low beam. According to ADR's, the reflector is within the correct height tolerance from the ground, it is within the right distance from the cars width, and is the correct wattage, it only needs the beam height set...

then once the car is signed off, go home and put the HID bulbs back in. happy days

sonicii Veteran

sonicii

Posted
Posted

What they havent told you is that it is illegal to fit a different type of globe into a reflector designed for HID, so fitting the self levelling thing is the only correct thing to do... Just dont tell them that theyve asked you to do something illegal or theyll get upset ..

Are you sure?? can you supply a reference?

It would be strange that the requirement for these cars to meet ADR is the HIDs are replaced with halogens.. when this doesn't comply with ADRs??

Also, HIDs require headlight washers.. not just auto leveling.

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted

its all in here..

http://www.infrastructure.gov.au/roads/motor/design/adr_online.aspx

the section referring to headlamps, and the section referring to filament lamps, both state that the "E" marking on approved ADR headlights will be void if modified without testing and approval, ie: installing a globe that is not the same as the globe type marked on the rear of the light assembly, due to filament and reflector misalignment.

Its up to you what you want to do, i personally wouldnt want to cut the loom and get rid of the HID components.

daisu Mentor

daisu

Posted
Posted

Just jump through their hoops to get it through compliance and rego.

Mine came fitted with halogens due to compliance. All they had done is unplug the ballasts, jammed a single fillament bulb in there (the high beam is a dual fillament bulb with the fog) and tap a wire from the bulb to the ballast plug.

I've seen a lot of cars have the fog lamps disabled for compliance. Mine had the relay removed in fuse box behind the battery.

Once they sign it off and you have rego, put the HID bulbs back in and plug the ballast back in. Just stick to the low temperature color bulbs (I think it's 4000k?) so you don't attract the wrong kind of attention, like it's really obvious people have HID's when they use 6000k or higher bulbs.

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted

But wouldn't part of the RAWS compliance approval process include testing and approval for headlight modification to meet ADR requirements?

this is the annoying bit. it is as illegal to fit HID globes to a regular headlight reflector as it is to fit a filament globe into a HID reflector. In both cases they are designed to have the correct parts fitted.

as usual, government standards allow a downgrade to crappier filament globes. double standards.

Youll find that the RAWS process only signs off that it is no longer HID, infact they do no testing at all of the replacement install regarding light output

sonicii Veteran

sonicii

Posted
Posted

this is the annoying bit. it is as illegal to fit HID globes to a regular headlight reflector as it is to fit a filament globe into a HID reflector. In both cases they are designed to have the correct parts fitted.

A double standard isn't too surprising from the government.. They probalby just overlook the 'non-stanard' lamp for compliance purposes..

I guess if they leave the HIDs in, they also breach the requirement for HID headlights to have washers and auto leveling.. least of 2 evils maybe??

  • 3 weeks later...
ObiV35 Apprentice

ObiV35

Posted
  • Author
Posted

Just to reply back, I got an auto sparky to fix my compliance issue. I was busy/lazy so it took me a while to get around to doing it. It now has modified H7 globes in there but all the wiring is still intact. Only 2 hours labor :) It would have taken me a lot longer, haha.

Thanks for all the info/advice.

ObiV35 Apprentice

ObiV35

Posted
  • Author
Posted

the ballasts are disconnected but not removed. I believe a standard H7 socket is in there, spliced straight from the original power before the ballasts? The D2R socket is still in there, just moved to the side. I think he had to modify the frame of the H7 globe so it would fit in the same spot.

see: http://www.consumabulbs.com/photo/499.jpg

  • 3 months later...
B-rice Mentor

B-rice

Posted
Posted

how do i see if the balasts is disconnected im not even sure of where theyre located. This is a picture of mine. Could i just plug in the bulb and it will work need to figure this out before i spend on the bulbs and to find i have to do a lot more.

post-77241-0-27345900-1371435926_thumb.jpg

post-77241-0-44834600-1371435936_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • R0yalT
      R34 GTR Vspec Garage Sale - All must go!

      By R0yalT · Posted

      Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...