Jump to content
SAU Community

Recommended Posts

That could make sense I have yet to put the PFC and boost controller on plus do all of the other work. Maybe sell it and buy a completed track car...

Oh and what is wrong with an RX8 :nyaanyaa:

I agree - they are very cool. In fact if they had 50-100 more kw I would own one right now. I was all geared up to buy one when they first came out, but just couldn't take the plunge for that amount of power.

A turbo kit would now solve that though :) *hint hint*

  • Like 1

does anyone even know how much power they make, fuel consumption and the cost of the car b4 they say cool

Then on top of that, the cost to turbo it. They r a nice looking car tho

Full engine rebuild was completed by mildrens recently with a lot of work done... It is one clean car :)

So it's had a new rebuild already despite being a newish car.. welcome to the world of rotary

RX8 gets the nod over the other 2 as well....nice ride

SR20 and RB25 neo r miles infront

Edited by discoPumpkin

Standard they have 177kw & 230 Nm but only weigh 1200kg - A 33 GTST has 187kw and 294Nm and the Skyline weighs just short of 1400KG so there is not a huge difference from stock...

The rebuild was done because my mates car yard bought it as a trade in without checking it properly and the lady owner had let the sump run dry and had pretty much destroyed the engine. The work done to get it back to the yard for sale is exhaustive, 6 pages of parts and labour at over $8k at trade prices of work.

If I had got it done it would have cost me $10k plus for that amount of work even with my contacts. The motor is still being run in as it is only at 500km since done. It is so hard to keep it under 5000rpm at the moment ;) but I love my rotary's and know how to run in a new engine (I have blown a few in my time lol)

I will probably do the exhaust, air induction, ignition and spark upgrade, throttle response upgrade and then reflash the ecu for now.

That will take it up to about 203kw which will be ample for a daily :)

Oh and 0 to 100 it is faster than a 34 and a 33 hahaha

They weigh 1300kg , but a RB25 will make 350rwkw aswell as an SR20 but with a lot more torque then a rotary, where as your moor could make that power it just needs a lot more work and money

It's still a good daily driver tho, has all the electrics and comfort etc. Don't get me wrong nothing beats the sound of a rotor, I love them myself but u need deep pockets to run them but its good u got one that just was rebuilt.

ps keep feeding it plenty of oil so it doesn't run dry again

Like I said standard they make 177kw... there are plenty of RX8's that make 300kw + with about the same work as a skyline... $8k to $10k and you are there.

I have had plenty of Rotary's from 13B PP to 20B's with power that would shock and destroy most skylines... Only problem was average engine life between rebuilds was only 6 months when running those engines :(

  • 2 weeks later...

Correct me if Im wrong.....

I baby my RB25 (rebuilt) these days. If I DO flatten it (very rarely, like once in 800kms) a nice cloud of black smoke is left behind.

Just carbon deposits in the exhaust, plus richness of tune?

I just saw this and thought it was funny.

A nightly prayer for the car enthusiast...

As I lay rubber down the street,
I pray for traction I can keep,
But if I spin and start to slide,
Please dear god protect my sweet ride.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 🤗
    • Any difference in induction noise?
    • If I got a dollar for every flipped commuter missile I've driven past I'd have two dollars   Some people get into wild adventures on the road and I doubt it's gender or ethnicity specific. I'm just glad I don't usually drive during peak times.
    • Just got the car back and gave it a good run back home Power wise, whilst it only made a extra 5 killerwasps up top at 7200 rpm, it made more power everywhere from 2500 rpm and kept pulling much harder all the way, to the point of me relearning when to shift so I don't hit the 7200 limiter, with the old intake it seemed to take alot more time to rev out, and, throttle response is also much improved  As I didn't want to remove the bumper every time I serviced the air filter (basically every aftermarket and fabricated CAI has the filter behind the bumper) it currently has a hektic exposed pod in the engine bay sucking in hot air, this will be rectified shortly after some some of my CAD (cardboard assisted design) for a alloy heat shield feed by the OEM intake tube behind the bumper, this will cop some wrinkle black paint, as well as the intake pipe for that totally OEM look... The only fly in the ointment was that the OEM "strut" brace doesn't fit over the rear runner of the new intake with the 2.5 engine is in the engine bay, as the 2.5 raises the engine up by 20mm, it's not a war stopper, and I didn't notice any difference without it in some twisties, but....... MX5 Mania is bringing in some GWR "fancy pants" braces that apparently do fit, if it bolts up I'll grab it, it is also stiffer than the OEM one, which is a bonus All in all I'm happy with the outcome      Fancy pants "strut" brace that gives the required clearance      This is where the clearance issue was, the GWR extends out past this
×
×
  • Create New...