Jump to content
SAU Community

Recommended Posts

hey guys,

i have a bit of a problem, my gear shifting is getting really notchy, and makes it weird to put into gear sometimes. its not to the point were it grinds , its sometimes just hard to get into gear, but if u dont push the clutch all the way in to the floor then it rumbles through gear changes a bit. i went to one place that said that my syncros are screwd and that i would be looking at like $1500 to fixit at least, it doesnt fall out of gear or grinds that bad so i dont think this is the prob.

its not consitant either, sometimes u can drive it fine and other times it will stuff up.

the reason that i am posting this in here is to find out if any of you know of a good place i can go to on the gold coast that is reasonabley priced and knowledgable, so i can get this prob checked out and fixed?

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/
Share on other sites

I recommend changing your gearbox oil with some Redline Gearbox Oil.

You may find that this will fix the problem for you..... out of interest when was the last time the oil was changed?

If you don't know then it is time for you to change it.

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854078
Share on other sites

i knew someone would ask, about a month ago..........lol, yeh it didnt help much, i was given some of this nulon aditive stuff that is supposed to help but i cant see how it would.

i think its a clutch prob hey, not the actual clutch just how it engages and dis-engages.

any places to go and c about the prob?

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854091
Share on other sites

After having a clutch replaced no too long ago, I asked my mechanic about a similar (slight) crunch going into 5th. My concern was gearbox but he mentioned that the parts quite often become glazed after prolonged use and recommended running a deglazing compound with the oil for approx 1 week, then change back to your regular oil. Apparently this usually does the trick.

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854096
Share on other sites

i have this prob, i replaced clutch month ago apparently it needs adjusting and now i have this prob on load and quick shifting 3-4th will grab before hitting 4th gear, spoke with machanic apparently redline might fix ill let ya know if it fixs the prob...else was told that sometimes little metal pieces falls off the syncros and when ya change gearbox oil it comes out but it doesnt explain how lubrication will fix the problem...but ill let ya know how i go b4 ya spend big dollars on getting it fixed..

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854134
Share on other sites

cool, sounds good man, actually your prob sounds similar to mine but i dont think my oil change helped much, and a few months back a mechanic drove my car and said that the clutch is good but just needs adjusting,so we will see what happens, i hope its nething but the need for a new box or reconditioning.

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854144
Share on other sites

I had a similar problem, could not get from 2nd to 3rd without crunch. But not always. Felt notchy etc. Was told the syncro story as well. Turned out to be clutch adjustment and bleeding not done properly. Apparently there is this extra drain line in the clutch bleed system and some air can get into it. Weird Nissan thing. Guys at ABS Sumner Park fixed it.

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854323
Share on other sites

Just another look at the situation, I've got a short shift thing in my car and "apparently" (don't take it as gospel), the synchros dont keep up when changing gears making them crunch. I know andrew changes gears faster than me and he crunches them. It's normally 5th that crunches. We find that if you leave it like 1-2 seconds before putting it into gear it doesn't crunch.

Just another idea.

My gearbox was starting to crunch heaps before I got the clutch replaced. Once I got the clutch replaced it stopped.

Link to comment
https://www.sau.com.au/forums/topic/41705-gearbox-problem/#findComment-854674
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Isn't there a fitting on the back of the balance tube? That's what the OEM boost gauge uses.
    • Getting a decent signal from all 6 throats is a challenge. I don't know for sure, but I suspect that the stock balance tube is not ideal for it. I have done it on an ALFA 4 cylinder (about 35 years ago, so don't ask for too many details). We drilled 4x holes in the manifold runners, put in some fittings and ran hoses to a decent sized (I think it was about 20mm diameter) pipe that ran the length of the inlet manifold. So, it was quite a decent volume. There is a "tuning" balance to be found between the volume of the common plenum on such a thing and the diameter of the pipes running from it to the runners. You need the volume to be large enough to damp out the sharp spikes in pressure signal you get as each runner gets sucked on by its cylinder, but not so large that it becomes too slow to respond to actual changes in MAP. And you need the hoses to be small enough to transmit the signal quickly, but not so small that they delay the signal. You might have to have more than one go at it, if there isn't any actual success based wisdom to be had here. Hopefully there is. Anyway, I would not do it on only a couple of cylinders. I would also not care about "permanently modifying a part". Just bloody drill holes and make stuff better. There is nothing sacred about any GTR unless it is a genuine museum piece that you shouldn't be modifying at all anyway.
    • He's still joining you, he's just delayed it and won't have the fulleh sick ITBs...
    • The strange thing is this is a URAS front bumper (or clone of it). The bumper actually does not sit flush with the GTT hood - You need the addon to make the hood 'long' enough to reach the bumper. I have no idea why they didn't incorporate this piece into the bumper itself.. instead of sticking it to the hood instead.
    • Another thought on this OLD topic: When you paint your bonnet lip, leave a small unpainted back lip/line along the back of the lip, where it rests on the bumper. That way, the line in the back is much more prominent than the gaps in the front/under the lip - and it breaks the hood-to-bumper connection at the "correct" place, when comparing to a GTR. I'm gonna do this with mine this week, so stay tuned for pics!
×
×
  • Create New...