Jump to content
SAU Community

Recommended Posts

I am wondering what is it that makes the deep sounding exhaust to a rb20, is it the type of muffler box used or the cannon tip? I have heard some and they sound awsome.

Do i get a rear cannon, with a center muffler, or not center muffler or a hotdog where the center muffler would be?

If anyone knows what brands are best, and if a cannon on the back is what does it that would be awsome.

Link to comment
https://www.sau.com.au/forums/topic/417082-rb20-exhaust-note/
Share on other sites

Make sure its a full turbo back to begin with, 3inch minimum and depending on how "legal" you want it depends on how many mufflers. Usually a centre muffler and cannon or straight pipe depending on your desire for the rear :)

Yer i got a threee inch dump atm with a full 3 inch with only a center full with drift pipes at the end and it sound really wraspy of u get what i mean, might try putting a cannon on the rear and maybe a different brand center muffler, i have heard some and they sound really deep sounds good

i believe it has a lot to do with manifolds as well as ive use about 3 different sorts with the same exhaust using a top mount trust one at the moment and the sound.... amazing best ever combined with a screamer pipe GOLD!!!

I have always admired the sound of an xforce system, they use a straight through oval muffler in the middle with a cannon on the back. all 3".

A friend had an almost identical exhaust on his R32 and that was deep like OP says but also had the big RB 6 cyclinder sound about it.

I would pick up a mild steel xforce to be honest, I got mine brand spankers for only 500 and its become almost my favorite part of the car.

Yer i might try switching to a cannon on the rear, and see how it goes the drift pipes sound good but im abit over it, and attracts attention from the po po to haha. I have see a few witb xforce systems and they soud good, and seem like good quality aswell

I have always admired the sound of an xforce system, they use a straight through oval muffler in the middle with a cannon on the back. all 3".

A friend had an almost identical exhaust on his R32 and that was deep like OP says but also had the big RB 6 cyclinder sound about it.

I would pick up a mild steel xforce to be honest, I got mine brand spankers for only 500 and its become almost my favorite part of the car.

agree.. i like my 3inch Xforce muffler on rear..

How loud are the 'out of the box' 3" xforce systems?

I have a large exhaust system and turbo, with a 3inch oval on the end it sounds just right, no droning or attracting attention, but on wot is awesome.

How loud are the 'out of the box' 3" xforce systems?

I have a large exhaust system and turbo, with a 3inch oval on the end it sounds just right, no droning or attracting attention, but on wot is awesome.

it not a throatie sound but a muffled roar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This could be sold and shipped to the US for many gold pieces. RMS has no say in that. Ask various Western Sydney inhabitants how it works.
    • Ha ha ha, mine loves to spend, all on the dogs (they're our kids, and her spending would likely rival that of some people raising children!) the only benefit is, her spending is tax deductible as she runs a business in the dog industry 😛 The above all means she can spend race car budget quicker than I can. 😛 That and a lot of the things I want are very expensive, and I can be a bit "you want how much for that?!" And at other times overly impulsive. Or I start the w days of research, get to day 1.5 and get really annoyed that no one will advertise actual specifics and it's just marketting BS and I go "well, now I don't want anything to do with that now!" Also I hate paying lots of money for something I can make from $50 in materials. Then I get the shits halfway through making things and wonder why others who just buy parts have more fun... 😛  
    • Their 240Z with the RB26 would be a real nice thing to have in a garage to come out for an occasional weekend cruise It's such a cool thing in so many ways Sadly, we have a blue 240Z shell that I walk past every day, just sitting outside a shed at work, it has been slowly disintegrating and falling apart into the ground for the last few years, the owner cannot be found, and I am unable to "claim it" I've been told by work and the RMS, the rust in the body is excessive though, and it has had most of the salvageable stuff, like panels, trim and switch gear stripped off it over the last year or two, work keeps threatening to put it in one of our metal scrap bins, I wish they did though, as it makes Mark sad walking past it  
    • Good tips, I like it! 😂😂 My wife is a LOT more frugal than me so it's only me we need to worry about! A splurge to her is buying 2 pairs of socks in one visit at Kmart!
    • Haha, the appropriate response to the question "Is this new?" is "I've had this for a while.". With the unspoken small print that a while may be the time since this morning or five years ago   And to be fair I learned that from the best, i.e. my wife. Because it goes both ways.
×
×
  • Create New...