Jump to content
SAU Community

Recommended Posts

Okay guys, Just got myself a Turbosmart Boost Tee and upped the boost on a stock R33 GTST Sedan to about 10psi. It then started misfiring so I went out and got myself some NGK coppers 0.8mm put them in and then went for a run, at first I ran at 7psi, no misfires runs fine some popping of exhaust. then 8psi, no misfires runs fine and no popping of exhaust...., then 9psi no misfires runs really well no exhaust popping, and then 10 psi, misfire galore... and popping exhaust galore.... I checked the coil packs when they were out, and there seemed to be no hairline fractures I could see.... THen again I didn't them examine using a microscope but with my eyes, they seemed fine, gave them a give wipe down and sprayed out the boot area.

So what seems to be the problem? anyone?

Link to comment
https://www.sau.com.au/forums/topic/417110-boosting-misfires-and-pops/
Share on other sites

Totes agreed, I have 5 yellow jackets and 1 new looking OEM coilpack. I wonder why for a while, then realised they might have died and the previous owner dropped in an OEM coilpack.

Car now is starting to develop a slight misfire on days at 0.8bar, I'm blaming those ling long coilpacks

please tell me you arent running stock ecu?

your probably hitting the stock rich and retard if its still the stock ecu

its also likely your coilpacks are dying on boost which is pretty common

but before you go and shell out for coilpacks check what ecu you are using

you cant just crank up the boost and hope it will work on the stock ecu

please tell me you arent running stock ecu?

your probably hitting the stock rich and retard if its still the stock ecu

its also likely your coilpacks are dying on boost which is pretty common

but before you go and shell out for coilpacks check what ecu you are using

you cant just crank up the boost and hope it will work on the stock ecu

We weren't going to mention R&R to this guy. Pops and misfires are different anyway. Once he had bought new coils and managed to get it to run at 10 psi without misfiring but started wondering why it was blowing black smoke and going slower than before.....THEN we would have told him about R&R.

Yea I have realised it's running R&R, going to get an ECU before I up the boost more. It's actually running quite nicely on 9psi at the moment, no problems, not even black smoke or sluggish. But before I do anything I need to deal with a speeding fine that should be coming round anytime now... Hopefully it wont hit hard...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man that dinner was such a long time ago....2010! I would only replace the rubber coolant lines with silicone these days; cheap, readily available and will last for ever. You will need new hose clamps though eg https://justjap.com/products/cooling-pro-silicone-engine-heater-hose-set-black-nissan-r32-gtr-rb26dett
    • I wouldn't look too hard at what they did with the R32 GTR in endurance racing in Australia... Lots of things weren't actually available from the factory in the way those cars ran them... Japan also followed what Fred Gibson was doing here with some of there endurance cars in Japan... Australia is also the reason for things like the Brembo brakes, and the change in the gearbox... And quite a few other tricks they used to pull. There's a few other SAU peeps still on these forums that will have heard the stories direct from Alan Heaphy, Fred Gibson, and Jim Richards when we were lucky enough to have a great dinner with them
    • For all the talk of "these parts are junk" I generally recommend OEM because it's really not as bad as claimed. I have never seen or heard of a case like the N63 where the oil returns completely clog with coked oil for example in ~10 years or less. Would it be nice if it were a straighter path? I guess, but most modern cars use a scavenge pump instead of a pure gravity return. Also the factory lines that would be relatively simple to convert to braided are generally speaking hardlines from the factory. I would consider braided line to be a regression, not an improvement. It's also been engineered such that all the hardlines have appropriate strain relief where needed. There's absolutely room for improvement, for example the HKS advantage heritage intake piping shows just how much can be done to make the turbos fight each other less in OEM twin turbo configuration and reduce compressor surge but it's rarely a simple/straightforward process. I recommend looking at what the group A/N1 cars did, generally speaking the changes they made were necessary and proven in endurance racing.
    • Yes, multi relays needed, and possibly a diode. I'm not actually going to think about it though.
×
×
  • Create New...