Can't Unscrew V35 Master Clutch Cylinder Screws?

[StevezAU]

Hey Guys,

Need to replace my clutch master cylinder so i'm having at go at doing it myself.

I cannot really see or get to the screws for the master cylinder (inside the car)..

Has anyone got any pics on how i can access them or give me any tips ideas??

Thanks

Steve

[grae35]

This is what my 2004 manual says about master cylinder removal steps. Hope it helps.

REMOVAL

1. Remove front kicking plate. Refer to EI-39, "Removal and Installation" .

2. Remove foot-rest (driver).Refer to EI-43, "Removal and Installation" .

3. Remove dash side finisher. Refer to EI-39, "Removal and Installation" .

4. Remove instrument lower driver panel. Refer to IP-10, "Component Parts Drawing"

5. Remove VDC/TCS/ABS control unit. (VDC/TCS/ABS model) Refer toBRC-66, "Removal and Installation"

.

6. Remove snap pin and clevis pin from the clevis, and separate it from clutch pedal.

7. Remove clips, and remove hoodledge cover.

8. Drain clutch fluid in the reservoir tank and remove reservoir hose from nipple.

CAUTION:

Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the

affected area with water.

9. Remove the reservoir tank mounting nuts and then remove the

reservoir tank.

10. Using a flare nut wrench, remove clutch tube.

11. First remove nuts on master cylinder assembly, and then master

cylinder assembly from the vehicle